Steve October 22, 2022 for Model Number DV56H9100EV/A2 When I start the dryer, it starts up fine, but it doesn't heat up at all and after about 10 seconds of tumbling it stops and an error code "HE" displays on panel. What could be causing this issue? Control board? I checked all the other thermostats, fuse, and heating element and they all have continuity. The heating element is not grounded either.
1 Answer You likely have a failed thermistor DC32-00007A. This can be tested for a resistance of 10K O @ 25°C 77°F. Read More...
Shawn S October 12, 2022 for Model Number WF56H9100AG/A2 Samsung front load washer stop mid way between cycle and won't start back.
1 Answer Shawn, If there is still water left in the unit then it is possibly a drain type of issue. If there is no water then check the cold water supply to ensure that it is not clogged up and check that the valve is getting 120 Vac to it. Read More...
Jim February 01, 2021 for Model Number DV56H9100EG/A2 Samsung dryer quits after running 30 seconds. Have replaced thermal fuse, thermister, & control board. What next? Thanks
1 Answer Jim, it would be recommended that the dryer blower housing and the ventilation, including what runs from the wall to the outside, for any excessive lint build up as it is common for this to cause a short cycle. Read More...