Shawn February 10, 2026 for Model Number DE92-02439E Does the letter at the end of the part # matter? The part # on the board is DE92-02439*. I didn't know if the star ment any letter would work
1 Answer Hello Shawn, thanks for contacting AppliancePartsPros.comIn some cases that letter change just denotes a revision, other times it may mean different programming or part orientation, this is wholly dependent on what the model # of the appliance is.in conjunction with the part or parts in question. Read More...
Mike January 17, 2018 for Model Number NE595R1ABSR/AA-0001 When pre heating upper oven, it starts then stops and throws code e-27. Says unplug and try again. Sometimes take 2-3 reboots before working. Any suggestions? Thx
1 Answer Hello Mike. E27 is for Oven sensor opened 1. Disconnect power. Open the back cover. Disconnect sensor harness from control Measure sensor resistance :1080 at room temperature? If different value, replace oven sensor. 2. If there is not any problem with oven sensor, Please check whether there is a damaged terminal or wire on harness. 3. Check resistance of oven sensor connector on main PCB. If good replace main PCB. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...