Bill December 03, 2021 for Model Number NE58K9560WS/AC Hi I have a slide in induction range that is very slow to come up to temperature, and broiler does not work. Elements ( broiler, convection and bake ) as well as temperature probe test ok for continuity and ohms readings within spec. Assume I need a new PCB?
1 Answer Bill, Yes, the main control board would most likely be the issue with the sensor checking ok. It would be recommended to test the elements to make sure that they are good but is unlikely all 3 would be faulty. Read More...
Jay August 04, 2020 for Model Number NE58K9560WS/AA I used the oven's self clean feature, and after cleaning for about 2 hours the display showed error code C-31 and the over remains locked. I powered off the unit and allowed it to cool overnight, when flipping the breaker back on the error code remains. The cook top is operational but the over remains locked and none of the keypads work. Researched showed the likely repair is the main circuit board, part DE92-03960B. Am I on the right track?
1 Answer Jay,Based on the information provided the C-31 error for your model is for excessive heat around the main PCB: Step 1 Locate the source causing the Main PCB to overheat. Step 2 If the main PCB is not being exposed to excessive temperatures and the C-31 code remains, replace the Main PCB. Read More...
Graham January 20, 2020 for Model Number NE58K9560WS Samsung Range NE58K9560WS The induction Top works fine but when pressing the panel for the stove section I get an error code C-F0 What do I need to repair? Thanks Graham
1 Answer Hello Graham,the code refers to a loss of communication between the top logic board and the relay board. Start by checking the wire harness that connects at the logic board at CN200 to the relay board at CN470. if wires are undamaged and both are secure then replace the relay board , part DE92-03960B. Read More...