Kevin Michael January 13, 2023 for Model Number WF448AAW/XAA Which board controls the drain pump; DC92-00125A or DC92-00130A
1 Answer Kevin, The main PCB board will control the drain pumps power. The control board part number will be DC92-00133A which unfortunately has been discontinued by the manufacturer with no suitable replacement available. Read More...
Charles May 29, 2019 for Model Number WF448AAP/XAA04. VRT Steam Getting a no drain code. Have cleaned all hoses, replaced pump motor and pressure switch. Machine is draining. What next?
1 Answer Hello Charles, follow the airline hose from the pressure switch down to where it connects under the outer tub and remove it. Check the inside of the tubing and the port it connects to for any kind of obstruction, debris or excess suds. Read More...
Janette January 26, 2019 for Model Number Wf448aaw samsung front load model wf448aaw error message "no draining" replaced water pump and removed all hoses to ensure they were clear. what is the next step
1 Answer Janette, Does the unit actually drain? If the unit will drain then the pressure switch is not reading the water drop and would need to be replaced. If it does not drain and the drain pump has been replaced then the control most likely has failed and not sending voltage to the drain pump. Check connections at the pump and on the board to make sure no harness has backed out or there are no loose connections. Read More...
Sam A June 16, 2016 for Model Number WF448AAW/XAA My washer will power on let you select your setting start these lecture cycle by starting to fill. Then within a few minutes it just shuts off. Could you help me with what control parti might need. Thank you
1 Answer Hello Sam. You will need to order and replace part number DC92-00133A on the unit. Read More...
Dominic R February 17, 2016 for Model Number WF448AAW/XAA The washer powers on but the door won't open/unlock. Which board triggers the mechanism that unlocks the door.
1 Answer Dominic, The main control board DC92-00133A would be the part that would trigger the locking mechanism to lock or unlock. Read More...
Stephen J January 02, 2016 for Model Number WF448AAW/XAA The washer will leak in only in the last 8 minutes of the rinse and final spin. The water valve will open and the upper nozzle builds pressure and the nozzle pops off causing water to leak from the valve opening. The check ball stops water from entering the tub through the steam assembly and causes the line to pop off and leak water. So I disconnected power to the valve to stop the leak. What part would be bad?
1 Answer Stephen, The most likely cause for this issue would be a bad nozzle assembly DC97-12578G. Read More...
Tim April 27, 2014 for Model Number samsung wf 448aap/xaa vtr washer steam Which PCB controls power to the drain pump, getting a ERROR NO DRAINING , checked all hoses to drain pump all OK. Checked drain motor runs fine on 110v power. Everything points to a PCB board problem just no sure which one. # for both boards DC92-00130A OR DC92-00125A Thanks for the help
1 Answer Tim, The part number for the main control board which controls the drain pump is part number DC92-00133V. Read More...
Emil May 22, 2012 for Model Number samsung wf448 front loading washer The machine wont power on. I removed the top cover and front access panel. When I press the power button I hear the main board click but the display board does not turn on. I ordered a display board dc92-00130a from appliancepartspros. Do you think this is the problem?
1 Answer Hello Emil. If there is power coming to the board, but there is no display, you will need to replace the board DC92-00130A. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...