Phil February 01, 2026 for Model Number Samsung ne63a6751ss When oven turns on the top element broiler never turns off which leads to the temperature rising out of control. I’ve tried cleaning the temperature sensors. Would the main board need to be replaced?
1 Answer Phil, thanks for asking.Using a multimeter, check the relay output to the broil to see if it opens and closes. Read More...
Donna July 17, 2025 for Model Number NE59N6630SS/AA-00 5-year old oven beeps, locks, and turns on randomly by itself. Also, LED display constantly flickers. Will replacing the control panel fix these issues?
1 Answer Donna, Thank you for your question. This issue will most likely be caused by a faulty control DG92-01069B, which would need to be replaced. Read More...
Chad January 13, 2025 for Model Number NE59N6630SS/AA-00 Broil element and interior oven heating element are not warming at all. Everything else works fine. All buttons, settings adjust, just no heat. Recently had a power surge each day due to weather. Any thoughts as to what part might be needed ?
1 Answer Hello Chad, thank you for contacting Appliance Parts Pros.This would be a failure of the main control board [DG92-01084A]. Read More...
Kevin July 12, 2024 for Model Number NE59R6631SS/AA My symptoms are that when I press any of the Bake or Broil buttons on the membrane, when I press Start the display illuminates almost everything, and after about 3-4 seconds, the control board appears to do a reset, i.e. the current displayed time changes to a blinking 12:00. The most likely culprit appears to me to be this board. Maybe the microcontroller lost part of its program and is going off in the weeds, or maybe some kind of a supply voltage glitch on the +5V line is causing the strange behavior and reset. Does this seem the most likely scenario? It doesn't seem like a faulty keypad would cause this. I also tried disconnecting the wires to some of the relays on the main PCB, but the behavior was unchanged.
1 Answer Kevin, based on the information provided, the sub-PCB DG92-01069B would be the likely cause of failure. Read More...
Kathy June 27, 2023 for Model Number NE59N6630SG/AA-00 I repeatedly get an error code C-F2 on my Samsung NE59N6630S oven. I unplug and turn breaker off to no avail. Do you know what could be wrong?
1 Answer Hello Kathy, the code refers to a problem between the main control board and the keypad. Read More...
Jjg April 30, 2023 for Model Number NE59N6630SS/AA Symtoms: My LED is flickering and my oven won't turn on (neither bake, or broil elements). The elements have continuity. The cooktop works. The thermistor reads 1072 ohms @ room temp, the high temp sensor has continuity. I have unplugged the LED and it had no effect. The touchpad seems to function correctly -- all buttons work. No wires burned, all connectors tight, no oxidation that I can see. Any suggestions other than replacing the entire control assembly for $250? Thanks
1 Answer JJG, This issue would most likely be caused by a faulty main control board that would need to be replaced. Read More...