Aaron March 04, 2019 for Model Number RFG298AARS Fridge won't stay cold inside, and freezer barely stays frozen. I've pulled off back access panel to condenser fan and the fan doesn't spin. Is it a bad fan motor or something totally different?
1 Answer Aaron, the condenser fan not operating is certainly going to cause this issue. If you test the voltage going to the fan, you will want to test for DC voltage from the red wire to the black wire. The DC voltage should read between 7 to 12 VDC by having the red probe of the meter on the red wire and black probe on the black wire. If the voltage is there, then you definitely have a condenser fan issue DA31-00146B. Read More...
Clarke December 02, 2018 for Model Number RS2545SH/XAA Why no video on changing Condenser Fan Motor? Is it too difficult for DIY'ers?
1 Answer Clarke,Part # DA31-00146B condenser fan motor does have a repair video on our site. Hope that helps. Read More...
1 Answer Joseph, If the compressor is not running then this could be a start relay if it has one or the inverter board is flashing an error and will need to be checked. Read More...
Johnny April 01, 2018 for Model Number Rf31fmesbsr Fridge was showing 22 E.. (Fridge fan, if I'm corect). Also the rear condenser fan would go on. I changed the fans, along with temp sensor to make sure.. the freezer is working perfect. The error code is gone. But the problem still remains.. the fridge and condenser fan would not go on.. What else could be be?
1 Answer Johnny, The 22 error would be an issue with the refrigerator fan but if the fan has been replaced then this would be an issue with the main control board of the unit. Read More...
Frank December 29, 2017 for Model Number RF263TEAESG/AA Our refrigerator stopped cooling and was flashing error code 23. According to Samsung that caused by the Condenser fan. We replaced the condenser fan but the fan is not spinning when the compressor is running. I used a multimeter and I am not getting 12V to the fan so I checked the main control board at CN76 pin 1 and 4 and I am getting 12V there. What else could the problem be?
1 Answer Hello Frank, This will be caused by either a bad connection or a harness issue. Read More...
1 Answer Hello Vasant. If the compressor runs, and the condenser fan is good, but not running because it has no power coming to it, you will need to order and replace the main control board on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Nicole October 01, 2017 for Model Number RS265TDRS/XAA The fridge fan started making a loud noise so we unplugged it and defrosted it. Once we got it defrosted we put it all back together and plugged it in. It still wasn't working. We bought a new fan, temp sensor, and mcb and nothing has worked. We then did a little more digging and found out that in the MCB the RFan was not getting any power. The thermistor is working and all other parts have continuity/voltage. The only thing we can't figure out is why the R fan has no power. The freezer fan and compressor motors are working fine. Any tips on what to look at? The R Fan is getting just millivolts. The freezer cools fine and ice maker works perfect. Thanks for any help you can give!
1 Answer Hello Nicole. If the main board is new, then either the door switch or the wiring inside the cabinet is bad on the unit. Fan motor will not have any power with the door open on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Rob August 06, 2017 for Model Number RF267AEWP/XAA The evaporator fan (R-fan) of my Samsung refrigerator RF267AEWP/XAA is not working. I replaced the fan by a new spare one, and does not work either. I would like to test fan continuity but not found any spec in the web. What I read in the service manual this may be caused by fan, main board or door switch failure. I am looking for help how to test the components to find the failure. Thanks Rob
1 Answer Rob, If you go to the main control and locate the CN76 connector. You will want to test from pin number 4 (Orange wire) to pin number 1 (Gray wire) for 12 vdc. If there is not 12 vdc then this will be a bad control board. Read More...
Jeffrey December 30, 2015 for Model Number RF4287HARS/XAA-0000 I know what my problem is: the Condenser fan is not working. Is there a way to manually test it? There are three wires going to the fan. Blk, Red, Wht. I know it is 12V. I just don't want to purchase a fan only to find out it is a control board or something else. Thank you
Mike November 08, 2015 for Model Number Rs267td Fridge is cold, freezer not, led panel code reads 21 E ,my research claims it's the fan, is this correct, if so where is it and can it be confirmed somehow?
1 Answer Hello Mike. FZ FAN ERROR-The Freezer Fan motor is read as not connected or the fanhas stopped, check the wiring connections in the freezer and at the Main PCB. Read More...