Dave October 12, 2016 for Model Number Samsung RF23HCEDTSR/AA This is a french door refrigerator and the flap on the left door does not retract when it closes - so, when the right door is shut you cannot shut the left door because the flap is in the way. I have seen articles with this problem and most of them cite a spring that goes on the outside of the flap, however, that does not appear to be the case with my unit. Is there a spring or do I need to replace the entire flap? Dave
1 Answer Hello Dave. You will need to order and replace the flap DA97-12624A on the unit. Read More...
Ark August 15, 2016 for Model Number RF263BEAESR/AA-0000 I would like to replace Spring French on refrigerator's left door. Is it OK to use this spring: da61-20128c? Thanks
1 Answer Hello Ark, Since the individual part is not listed for this model we can only recommend replacing the door flap assemlby DA97-12683A since we have no way to determine if the spring you were veiwing will work properly. Read More...
Charles H February 09, 2015 for Model Number RF263AEWP/xaa On the left door there is a flapper that slides into a slot so that when the left door is closed, there is a good seal. This flapper pulls back when the door is opened so that it will go back in the slot. At the bottom of this flapper, there is a small spring that swings the flapper into a straight position. The spring seems to be broken as it will not fit back into a crevice made for it. I just need to know what this part number is and can it be repaired simply by pulling down on the top arm of the spring, up on the bottom arm, and then simply sliding the new spring arms back into the holes the broken spring arms came out of?
1 Answer Charles, You could try to put the spring back in place but if unable to do so you will need to replace the French assembly on the unit. Read More...
1 Answer Hello Robert. According to the model number you provided, DA61-20128C is not used on the unit. It is used in the ice dispenser. Hope this helps. Read More...