Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for 3-Position Temperature Switch (Selector) by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM18048363
Manufacturer Part Number: WPW10168256

This 3-position temperature switch is the user control that selects between three temperature settings, restoring reliable temperature selection and consistent performance. It replaces a worn or failed selector to recover intended temperature control. What it does

  • Acts as the selector that routes the control signal to one of three temperature positions.
  • Commonly used when temperature settings fail to change or the unit stays at one setting.
  • Helps eliminate inconsistent temperatures or intermittent heating/cooling related to selector faults.
  • Switches between preset temperature ranges without changing other controls.
What's included
  • One 3-position temperature switch
Install notes
  • Disconnect power to the appliance before beginning any work.
  • Note or label wire locations and take a photo before removing the old switch for correct reassembly.
  • Handle connectors carefully; ensure secure, fully seated connections after installation.

More
$68.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Questions & Answers

For Whirlpool 3-Position Temperature Switch (Selector) (Part Number: OEM18048363)

1 Answer

Wayne,

You will want to check the screens on the water valve and on the hose if there is one on the hose to make sure that there is no obstruction in them. If the screens are clean then you will want to replace the water valve 285805 on the unit.

Read More...

1 Answer

Hello Tanya. Test for power to the valve. If there is none, replace the switch on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Read More...
Safety note: testing, adjusting or bypassing anything while the appliance has power is a job for a qualified technician. Unplug it before you open it up, and keep it unplugged until every panel is back on.

1 Answer

Hi Eric. If it is doing this through all the cycles on the timer, then it is a bad timer. Part # Is WP3948323. It may need the water valve if you are rinsing in cold and not bringing any water in. This part # is 285805. Thank you

Read More...

1 Answer

Hello John. If it is set on hot/cold, it will bring in hot water for the wash cycle and cold water for the rinse. If you set it on warm then it will mix them. Hope this helps.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google