Margomay April 27, 2018 for Model Number Whirlpool Duet Washer One of the baffles broke off in my Duet Washer. I ordered a set from you but was wondering if I could go ahead and wash clothes until the baffle arrives. Will it hurt anything or leak? Thanks
1 Answer Hello MargoMay, While the machine will not leak, the clothes may not agitate properly so the cleaning action will not be as effective. It will not hurt the machine to run it with baffles missing. Read More...
Shawn July 05, 2016 for Model Number MHWE400WW01 Will my washing machine leak water if i am missing a baffle?
1 Answer Hello Shawn. No, it will not leak because it is missing a baffle. You need to check your hoses and seals. Read More...
Jo June 18, 2016 for Model Number MHWE400WW01 I have a Maytag washer Model MHWE400WW01 and one of the baffles broke off. Will this part by Whirlpool Part Number AP6018 fit my washer? Thanks Jo
Baffled April 17, 2015 for Model Number MHWE450WW01 Do the baffles on this model washer (part#w10283356) clip in from inside of the tub or does the machine have to be taken apart and the baffles screwed in.
1 Answer Baffled, The baffle for this unit does not require screws and has a hooks that slide onto the basket and clips into place. Read More...
Chris April 17, 2015 for Model Number MHWE450WW01 Does your listing come with the 3 baffles needed for the drum or is it just one??
Ken March 31, 2014 for Model Number WFW9750ww01 One of the baffles just busted on my washer. Is there a difference between the W10283356 baffles and the ones that you can buy 3 in a kit? It seems that the baffles that come in a kit also come with the locking screw. It would seem that the baffles locked in with a screw would be more secure.
1 Answer Hello Ken, The ones listed for the unit [AP500807] are the ones you will have to use unless the spin basket has been changed. This is the difference. The kit of three are the style used in the replacement spinner assembly. The ones without the screw hold just fine the way they snap in unless damage to the spin basket has been incurred. Read More...
Richard June 27, 2013 for Model Number wfw9470ww01 I have replaced the baffle in the washer and again it broke off. the clips are not worn but seem to shear off. the drum seems not to be bent in the clip areas...what can i do not to have to replace this piece yearly.
1 Answer Hello Richard. Usually these break when the unit is being overloaded. If you are not overloading the unit, you will need to replace the inner basket assembly. Read More...
Mark May 27, 2013 for Model Number WFW9451XW00 I already replaced a baffle once, and it lasted only 2 weeks. I know it's the same one I replaced because I marked it. The little plastic clips seem woefully inadequate. Isn't there some way to reinforce these baffles from inside the drum?
1 Answer Mark, Unfortunately there is no type of reinforcement that can be done. You will want to make sure that the unit is not being overloaded as this can contribute to the baffle breakage. Read More...
1 Answer Ray, the baffle does not come with a screw. It seems that the baffle will clip onto the tub. Thanks. Read More...
1 Answer Ray, according to the manufacturer the baffle does not use any screws. This baffle clips onto the tub. Thanks! Read More...