John June 20, 2022 for Model Number KEMS308SSS04 The thermal fuse on the (lower) oven keeps blowing. I've replaced it three times. During troubleshooting with your team, I realized: I've never heard the cooling blower kick on—except during (upper) microwave usage. I assume the blower should also help protect the lower oven, correct? In diagnostic mode, I get no error codes, but when testing the blower relay, I only hear a 60Hz humming, not the blower itself. Mind you, the blower works fine during microwaving. What are you thoughts on how to keep my lower oven from overheating and tripping its thermal fuse? This is an older installation (no changes over the years), but the problem just started occurring last year. Regardless of the blower not kicking on, I am going to add more ventilation to the back, in the hopes that it will help. I've also recently replaced the main controller board—to no avail. Thanks for your suggestions!
1 Answer Hello John, the microwave has its own cool fan, so does the lower oven WP8303972, neither affects the other, unless the lower oven fan is replaced the thermal safety fuse will keep opening in lower oven use. Read More...
Keith August 25, 2020 for Model Number KEBS177SSS04 Kitchen Aid single wall mounted oven after baking remains hot and control panel, front panel and side of oven housing heats up. Suspect the blower is not operating. Does this sound correct? Is access to the blower from the rear of the oven? Thank you.
1 Answer Keith,Based on the information provided the blower is something to look at for sure and it is accessed through the top of the oven.WP8303972 Read More...
Joe January 09, 2017 for Model Number KEBK206SSS02 I used the self-cleaning feature on my double oven and the problem seemed to first appear. Loud noise that sounded if a rattling in the back of the unit was occurring. I took off front face of unit and noticed that the blower seems to be misaligned from side to side. Appears as if it may have slipped off of its axle on right hand side and thus rumbles when it turns. Hope to avoid buying a whole new blower if can be reattached.
1 Answer Joe, Unfortunately the blower wheel would not be able to be reattached and would need to replace the blower assembly. Read More...