Carolyn March 11, 2018 for Model Number KGSA906PSS00 The oven light bulb is out and I am unsure how to remove the light globe to access the bulb. I tried to unscrew both globes and they don't budge. How do I access the bulb to replace it?
1 Answer Carolyn, To replace the bulb you will need to remove the light lens and will want to try to use a rubber gripper pad to get this out. There is no other other way to get it out. Read More...
Sally February 10, 2016 for Model Number GMC305PDB6 Light burned out in microwave of wall oven. Can't get hold of light. Is it a lens? How do I get it out?
1 Answer Hello Sally, If you cannot grasp the bulb WP4173175 to unscrew it you may have to pull the unit and remove the socket to allow access. Read More...
Eileen February 10, 2016 for Model Number GMC275PDB1 How do I remove the bulb in top of microwave? Does it screw out or pull out? Can't get a hold of it. If we take screws out of front of microwave does it pull out so we can get to it? Thank you
1 Answer Eileen, The light bulb on this unit will screw out and you may have to pull the unit out of the wall in order to access the light bulb to change it out. Read More...
Larry November 07, 2013 for Model Number MMW7530WDW01 How do I replace the microwave light on this model. Do I have to disassemble to replace this bulb. Is the bulb a screw base or otherwise. Also what is the part number of the bulb on this model.
1 Answer Larry, In order to change the bulb in your microwave you will need to pull the unit from installation and go in from the top. The bulb is a push in type bulb not screw in. Read More...
Scott S March 11, 2013 for Model Number GMC305PD I need to replace the bulb. I don't see any instructions in the owners manual. Thank You.
1 Answer Scott, To replace the lower lights on the microwave, there is a cover over the light that is held in by a screw. Remove the screw and lower the cover, unscrew or pull out the light bulb. reinstall. Read More...
Gabe October 17, 2012 for Model Number GMC305PD008 The Microwave light is blown. I tried unscrewing from within the microwave oven ...now it's loose. 1) Can I get a LED replacement bulb 2) How do I access the bulb to replace. Thanks. Gabe
1 Answer Hello Gabe, the microwave bulb WPW10440740 just plugs straight in. You should be able to remove the lens W11193483 and pull the bulb straight out. If the lens won't come out, you will have to get into the top of the microwave from the outside. Hope this helps! Read More...
Lenny October 15, 2012 for Model Number Gmc305prq01 You say just remove the micro to access the bulb but do not say how to remove the trim pieces. Help?
1 Answer Hi. Remove the microwave. Remove the cabinet cover back screws and you will need a T-20 security type screwdriver tip on one back screw to get the rest off (use the same tool for the rest). Pick one up @ the local hardware store. Then the bulb part # WP4173175 is accessed from the top inside the cabinet. Thank You. Read More...
Tex January 12, 2012 for Model Number GSC308PJS05 I'm in the same "boat" as Bill, above. I try to remove the lens cover in the microwave oven and IF I grip hard enough and use a rubber 'gripping" sheet I can hear and feel the lens cover turn but there is NO advancement in removing the lens. I turn in BOTH directions!!! Do I need to stand on my head??????
1 Answer Hello Tex. If the cover turns both ways, you will need someone to hold the socket on one side and you will unscrew the cover on the other side. Once removed, you can access and replace the light bulb WP4173175. Thank you. Read More...
Joan December 17, 2011 for Model Number RMC305PVSOO To replace light bulb. You say remove outercover of microwave, remove lens cover. My question is how to do these tasks. My Micowave is attached to lower oven.
1 Answer Hi Joan. The surrounding trim needs to be removed. Look at the bottom below the door and remove this cross piece trim first. Open the door and remove. Remove power. Remove the door. This will give better access to the bottom trim screws. This removed will give access to the side trim screws. Side screws removed will give access to sliding the entire microwave out and then the microwave top cover. The lamp base socket is in the top. You will twist and lift the socket to access the lamp. Do not use your fingers on the new bulb because of the residue of your finger tips will react with the Quartz type bulb and once lite, it will react and negatively affect the life span of the bulb. Bulb part # WPW10440740.Thank You. Read More...
Bill November 09, 2011 for Model Number GSC308PJS05 I am referring to the microwave oven light, which is burned out, not the lower conventional oven light. The lower oven has a clearly accessible lens cover, as you say. But the microwave light in the ceiling of the microwave is described as "inaccessible" in the parts diagram in the user manual (page 5). I can see it. It protrudes from the ceiling about a half inch or so. There does not appear to be much clearance for removal of a lens. But I cannot tell if there is a separate lens and a bulb, and if I put any more pressure on whatever it is I am trying to twist, I am afraid it will break. Does this mean this product requires a service call from you just to change a light bulb?
1 Answer Hello Bill. You need to remove the outer cover of the microwave to access and replace the bulb you are referring to. Hope this helps. Read More...