Hank Park April 25, 2020 for Model Number Gas Top Whirlpool SCS3614LQ0 When I try to ignite the front left side burner, I can hear clicking sound and smell gas. But very often, not always, it does not ignite. I cleaned the head very well but still it occasionally ignite but most of time fails. If it fails to ignite, I have to use a butane gas igniter to ignite the burner. Should I replace the head and cap? All other 3 burners work fine. Thanks.
1 Answer Hello Hank. First you need to check if there is a spark shooting up from the electrode to the burner cap when you turn the knob. If there is no spark, check the electrode wire and the spark module by switching two electrode wires on the module.. The spark module is AP6015060. if there is a spark but it's not shooting up using the fine sand paper clean the top of the electrode. If the spark shoots all over the place, replace the burner base with the electrode p/n AP3119580. Good luck. Read More...
Yogee T November 26, 2019 for Model Number JGBP30WEW1WW We are looking for a 2 inch diameter burner cap that will fit the GE gas range model JGBP30WEW1WW. We had ordered one that seemed a fit but it didnt. Much appreciated, Yogee
1 Answer Yogee T,Based on the model number provided the manufacturer has discontinued this part and has not provided a suitable replacement. Read More...
Jeff August 11, 2019 for Model Number WFG320M0BS I need to the smallest burner cap on the back right side. It measures 2 1/4. Can you let me know the part number so i can order one. Thank you!
Joseph Weber July 26, 2017 for Model Number SF369LEPT0 trying to find the right burner caps but all your model no# are different,what caps do I need ,Please help thank you.I need all four,one large two medium and one small
1 Answer Joseph, The burner caps for the model number you supplied are : WP8273345 / WP8273345, Left Front burner(lrg). WP8273344 / WP8273344(qty 2) Left Rear/Right Front burner(Med.).And WP8273343 / WP8273343 Right Rear burner(sml). Unfortunately the parts need are out of stock in the warehouse, the parts would need to be ordered from the manufacturer, this will add a few days(5-10) to deliver the parts to you, once the order is placed. Thanks, Read More...
John May 12, 2017 for Model Number SF367LEMQ0 Hi, my question is, the stove it said self cleaning, how can clean the oven, and olso we would like to buy the 4 burnes and the 4 center caps but they seen to be a diferentes sizes, and can we buy then at any store near concord ca. Thanks
1 Answer Hello John. You will need to order 1 of WP3191904, WP3191898, WP4455981, WP4455979, and 2 of WP4455980 and WP3191901. We do not have any retail stores. Sorry. You have set it to clean mode on the control panel to self clean the unit. Read More...
Brian October 17, 2015 for Model Number 3196685 whirlpool gas oven Looking for burner caps in grey color. 2 large, 2 small. Can you direct me to a link where I can find them? Can't seem to find my oven number online. Maybe because it's an older model. Thanks!
1 Answer Hello Brian, You will need to verify the model number from the units' I.D. tag. I'm sorry but the one provided does not come up as a valid model number. We would require the complete , verified model number to pull up the manufacturers' recommended part that we would be able to guarantee would work with your unit. Thank you for your patience and understanding in this matter. Read More...
Jill June 26, 2015 for Model Number WFG361LVQ1 I need to replace the smallest burner on the back right side. I can't find my tape measure, but I think it's 2 1/4. Can you tell me the exact size? Is there anything compatible that I can use that's less expensive? Thank you!
1 Answer Jill, The right rear burner cap for your unit is part number WPW10205324 and we could not recommend another that would work for this unit. Read More...
Ron November 28, 2014 for Model Number TGS325KQ0 How do I troubleshoot the gas supply underneath the top of a closed or a sealed burners system?
1 Answer Ron, To trouble shoot any type of gas supply issue you will need to have a Manometer to measure the Water column inches of pressure. You would need to remove the sealed burners and lift the main top in order to do this. Read More...
Sarah October 29, 2014 I have a KitchenAid 36' cook top with 6 burner (4 fir15k btu, 2 for 6k btu). It's been more than 10yrs. I lost all the burner caps during the moving. I want to know the right size of them to buy.
1 Answer Sarah, To be able to assist with getting the proper burner caps for your unit we will need to have the model number of the cooktop. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Robert P September 20, 2014 I have a GE Arora oven purchased from Home Depot. I need burner caps that fit. or 1 extra large cap. The oven is constantly cleaned and the serial # & modle number have been cleaned off the sticker...Can you help.
1 Answer Robert, Unfortunately without the model number of the range we would not be able to assist with the burner cap part numbers. Read More...