Stacie October 27, 2020 for Model Number Refrigerator door hinge for part # WP1207104ED what is the pin that goes inside of this part ? Refrigerator door hinge for part # WP1207104ED what is the pin that goes inside of this part ?
1 Answer Hello Stacie, please repost your question with the model number so we can locate the parts list for your model and the requested part. Read More...
Chris C December 20, 2016 for Model Number 596.75539400 I have a Kenmore Elite Trio model# 596.75539400 and from part number # AP6005510, I need part number 9. Can you please provide that specific number from your catalog?
1 Answer Chris, Part number 9 on the diagram would be the center hinge pin and is part number WP67006642. Read More...
Debra W. December 19, 2013 for Model Number abb2222feb In moving the top refrigerator hinge for placing the door back on is missing. I need one. Does it come with the screws?
1 Answer Hello Debra, The upper hinge is WP12566606ED and the screws do not come with it. The screws are part number R9800670. If it is the lower hinge you need, WP12607104ED and the screws are W11573362. You will need to order three of these screws to mount the lower hinge. Read More...
Ed W. August 08, 2011 for Model Number MBB2256GES The door on the refrigerator seems to have dropped. Would a new hinge solve the problem. It seems that a spacer needs to be in the hinge, is this true?
1 Answer Hello Ed. Check and make sure the bushings 10961005B in the door are good. Also, check and make sure the hinge shims WPM0274062 are good as well. Hope this helps. Read More...
Ed W. August 07, 2011 for Model Number MBB2256GES The door seems to have dropped and does not completely close. Does all it need is a door hinge that is listed?
1 Answer Ed, Unless the hinge itself is bent, you probably wont need it. You will need to check the refrigerator for level and that all 4 feet/rollers are on the floor solidly. You will most likely need a hinge pin kit 12002311 and shim WPM0274062 to compensate for the drop, they would wear out before the hinge. Make sure both the top and middle hinge mounting screws are as tight aspossible when you're through and I think you'll be fine. Thanks and Good Luck. Read More...