Jennifer January 17, 2014 for Model Number LXR9245EQ1 My upper/lower agitator will not move at all. It sounds like it wants to! Do you think it's possible that something is stuck underneath?
1 Answer Hello Jennifer. Check and see if the agitator is stripped out. Also, check the motor coupling. If all is good, transmission will need to be replaced. Read More...
Sandy April 28, 2013 The agitator wouldn't move as fast as in past, it just worked slowly and not enough to move clothes. What parts do we need?
1 Answer Sandy, We would need the model number of the unit to determine which part you may need. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Joe T. October 21, 2012 for Model Number RAL514BQO The upper agitator does not move unless I press down on it and move it slowly clockwise direction, What parts do I need to fix that and what size is the holding machine screw that hold the pieces in place? This machine is fully functional otherwise.
1 Answer Hello Joe! You will need to replace the parts located in the agitator repair kit, part number 285811. You will use a 7/16" socket to remove the agitator bolt. Thanks! Read More...
Gerald G. November 16, 2011 for Model Number LXR 7244JQ1 The teeth on the upper agitator are worn. Which part do I order to replace the teeth. Thank you.
1 Answer Hello Gerald. For the teeth inside the agitator, you will need to order the mover WP3349019. If the cams are worn, you will order 285811. Hope this helps. Read More...
1 Answer Hello Creston. What is the model number of you unit? Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Ben S. July 07, 2011 for Model Number LLR6144BQ0 The upper part of the agitator does not go back and forth. Upon removing the fabric softener dispenser and the cap over the bolt to the agitator, I discovered that the gear and little arms that retract are stripped out. Does this part include the gear and little arms?
1 Answer Hello Ben. No, the part that you will need is the cam kit 285811. Hope this helps. Read More...