Mike B June 22, 2015 for Model Number DUL240XTPS1 I think I need a new touchpad control panel but want to be sure if I push the start part the normal cycle light flashes if I hold it,also I need the black one.
1 Answer Hello Mike. If you press start, and the unit does not start, but the door switches are good, you will need to replace the control panel WP3385773 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
John S. May 04, 2015 for Model Number DUL240XTPT3 There are 4 buttons on the left side of the control panel. The button that says light, that button keeps on flashing and the dishwasher will not start.
1 Answer Hello John, On this model, if any button other than the clean light is flashing you will need to replace the touchpad WP3385775. Read More...
Mark T. June 12, 2012 for Model Number DUL240XTPS 1 My DW starts for a few seconds but then shuts down. The Start/Resume lights stats flashing quickly without any pattern to the flash. I can't seem to get the DW to flash in any way to tell me what is wrong. I shut down the breaker for 10 minutes but no changes
1 Answer Hello Mark. Based on the information you provided, it sounds like the control panel WP3385773 has a bad button and you will need to replace the control panel on the unit. Read More...