Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Customer Questions and Answers for Control Assy., Temperature by Whirlpool

Best Seller
Manufacturer Part
4.89 (64)
By: Whirlpool
Part Number: OEM12208731
Manufacturer Part Number: 61005790

Questions & Answers

For Whirlpool Control Assy., Temperature (Part Number: OEM12208731)

1 Answer

Curt,
You need to check the condenser and condenser fan to make sure the condenser is clean with no lint obstructing airflow and the fan is running. The condenser fan should be running at any time the compressor is running.

Read More...
Larry for Model Number Amana (Model) TC20NL (Mfg No) P1106203NL

Re: Temperature Control Does Not Work This Refrigerator has Two Temperature Controls - one marked Refrigerator, the other Freezer. Both are dial controls marked from 1 to 7 (the coldest set point). The Freezer also controls "on/off".. The Problem: There is no set point control for Temperature. When the refrigerator is running it swings thru a range from 25degF and -5degF. It typically will turn itself off at -5degF. To restart, it requires turning the Freezer knob slightly to the right. After 5 or 6 resets, the final set point has reached 7. To now restart the refrigerator, the controller must be reset to 1, then continue to make manual resets, each at a slightly higher set point. I am suspecting the problem is a defective Cold Temperature Controller. This is a 35 year old refrigerator, but has run all this time with minimal repairs. If I can successfully find a replacement part,I would like make the repair. Otherwise it's time to say farewell. Larry.

1 Answer

Larry, the temperature control should be replaced. I believe for your model the part number you need is [R0161051], which is no longer available from the manufacturer. You should check the part number on the one in the fridge to verify the correct part number.

Read More...

1 Answer

William,
Based on the information provided the issue could be something to do with the airflow...I would start with checking the evaporator fan motor, damper or a defrost issue.

Read More...

1 Answer

Hello Robbie. You will need to look for a defrost issue. If none is found you will need to check and see if the fan motor WP61004888 is bad and will need to be replaced on the unit.

Read More...

1 Answer

Rick,

If the unit is cooling properly then this issue would most likely be caused by a faulty thermostat which would be part number 61005790.

Read More...

1 Answer

Jennifer,

If the evaporator coils are impacted with ice, you will need to test the defrost heater and the defrost thermostat. They should read closed for continuity when cold. You can test this with a multi-meter TJMA-DMT3. I will include a link at the end to assist you how to use the multi-meter if needed. If both parts are good, you will need to replace the defrost timer. Once the problem is repaired, you will need to thaw out the ice on the coils before the unit will operate properly. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html

Read More...

1 Answer

Hello Rich,

If the thermostat is shutting down on higher numbers 5-9 then there would be a problem with the temp control 61005790 and it would need to be replaced.

Read More...

Have questions? Ask our pros!

Contact us in a way that is convenient for you

Call us 1-877-477-7278
Need Help? Chat with a Pro
Or ask a question by filling in the form

Share your thoughts with other customers

Ask a Question
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google