Steve October 05, 2020 for Model Number Rf385pxew I need to replace the control panel on my whirlpool oven. Will the stove top still work after I remove the control panel?
1 Answer Hello Steve,the cooktop controls/elements are a separate circuit from the oven control board, yes the cooktop will work. Read More...
Steve October 05, 2020 for Model Number Rf385pxew My control board needs replaced. If I remove the control board, can I still use the 4 top burners on the stove?
1 Answer Hello Steve,the cooktop controls/elements are a separate circuit from the oven control board, yes the cooktop will work. Read More...
Kstan April 07, 2019 for Model Number RF385PXEW0 I have a code of E1-F5. From everything I've seen it looks like the Control Board or ERC. Does this look like the correct part to repair this issue to you? If so, the part shows out of stock. How soon before it's in stock?
1 Answer KStan, there is a switch on the door lock assembly [W10855029] that you may want to check, as well as the door switch, as this error is particular to the door latch and lock. If these components test good, then you would want to replace the control [WP6610056]. To get an accurate ETA on the part, you would need to call us at 1-877-477-7278. Read More...
John August 29, 2018 for Model Number RF385PXEW0 When the oven is plugged in--just sitting there--it just starts heating up without anyone pushing any buttons or doing anything. The only way we have figured out how to get it to stop is to unplug it. (Pushing "cancel" or "off" or any other buttons doesn't do anything.) I was told that I probably need a new range oven control board--part number WP6610056. First, does this sound right--that my problem could be fixed by a new control board? Second, what else could be the problem? Third, if I purchase a control board from you and it doesn't fix the problem, can I return the control board and get a refund? (In other words, what is your return policy?) Thanks!
1 Answer john, Presumably, the oven is the issue, in which case yes, you would most likely need the WP6610056 Range Control, the bake or broil relay has closed contacts and is supplying power to the element on a continuous basis. A less likely possibility is that a L1 wire has shorted, and is allowing power to the element constantly, but highly unlikely. Here is a link to the AppliancePartsPros.com return policy [https://www.appliancepartspros.com/customerservice/returns.aspx] it will answer your questions about returned items. Thanks, Read More...
Barb March 19, 2015 for Model Number RF385pxg My control panel will shut off sometimes oven stays on and I keep pressing on different spots on panel and it will come back on power failed will show up some times then other times it may go a month and work just fine do I need to replace the whole panel or are there parts to it that may cause this
1 Answer Hello Barb. The first thing to look for is a wiring issue in the unit. If all of the wiring checks out good, you will need to order and replace the control board in the unit. Read More...
Brucek July 06, 2013 for Model Number rf385pxewo Broiler element doesnt work. Replaced element but still doesnt work. Thermal fuse was shorted, Put a jumper across fuse still no broiler element heating. I am not getitng any error messages. Do you think control panel is at fault? Baking element and stove top elements work ok
1 Answer Hello BruceK. Yes, it sounds like the control WP6610056 is bad and will need to be replaced on the unit. Read More...
L Albright March 03, 2013 for Model Number whirlpool Range RF386PXE code F-2 is showing oven will not turn on.
1 Answer L, The F2 error code indicates an issue with the oven Temp sensor WP8053344 or the control WP6610056. You'll need to use a multi meter and check for 1050 to 1100 ohms resistance across the wires on the sensor ( preferably at the clock connector) if the resistance is not in range replace the sensor and check the wiring connections, If the resistance is in range, you'll need to replace the control. Read More...
Carl November 29, 2012 for Model Number RF386PXEW0 I'm getting the E1-F3 fault code when trying to bake or broil. I've replaced the oven sensor and I still get the code. Reset entire oven by disconnecting power numerous times and still getting fault code. Elements are not getting hot. Checked resistance of elements 15 & 20 ohms and checked the thermal fuse. Stove top works fine. Hate to have to trash the oven. Control board looks good. No burn marks. All buttons working. Please help or suggest additional tests. Thanks, Carl
1 Answer Hello Carl, The fault indicates that the top oven sensor is shorted. This can only be corrected by replacing the top oven temperature sensor WP8053344. If the wiring between the sensor and clock assembly is checked out and OK and not pinched at any point, the service manual now says that if the code continues, replace the clock assembly WP6610056. Read More...
Mike January 30, 2012 for Model Number rf328pxewo Error code 5. Does this mean mother board replacement?
1 Answer Hello Mike! Yes, an F5 failure code on Whirlpool Ranges indicates a board failure. The model supplied, rf328pxew0, seems to be invalid. We will need the correct model number to verify the correct board used on your appliance. Thanks! Read More...
John January 28, 2012 for Model Number RF387LXGN0 Power surge during storm knocked out display and oven is now inoperative. I'm "assuming" the motherboard is burned out and that this p/n is the replacement part I need.
1 Answer Hello John! Yes, it does sound like the electronic control needs to be replaced. Your part number is WP6610056. Thanks! Read More...