Jerry February 12, 2014 for Model Number mer5751baq If the baking element read 21.3 ohms is it good or bad?
1 Answer Hello Jerry. Based on the information you provided, the element is good on the unit. Read More...
Alberto November 22, 2012 for Model Number MER5552BAQ When testing the bake heating element 74011047 with an ohm meter, what should the reading be?
1 Answer Hello Alberto, The resistance on a bake element WP7406P438-60 should be approximately 20 ohms. Read More...
Norine N. May 14, 2011 for Model Number maytag elec range MER5552BAW How do you replace the heating element? I know you unscrew the two screws from the plate and then how are the connectors attached?
1 Answer Hello Norine! You will need to unplug the range. Remove the oven racks. In the back of the electric range, there are two screws that hold on a bake element. Remove these two screws and gently pull the element towards the door opening. Remove the wires from the bake element one at a time. You may need to use long nosed pliers to remove the wires. Be careful that the wiring doesn't fall back through the back of the oven. Once the wires have been removed, discard the old element and replace it with the new one. Once the new element is installed, plug the unit back in and test. Hope this information helps! Read More...