Nobakingtoday June 01, 2013 for Model Number AOGD2750 Double wall oven - displays for both ovens read 'off'. Cannot program anything using touch panel (clock, ovens). Turned off power from breaker hoping for a reset, but didn't do anything. The 'off' condition is not an 'error code' per the users manual. Any help greatly appreciated!
1 Answer Nobakingtoday, You will want to check the connection of the ribbon harness to the control board. Also check to make sure that it has a firm connection. If this checks ok then the membrane would most likely be the cause of failure. Read More...
Simon March 03, 2013 for Model Number AOGD2750SS My Amana double gas oven was burning something from the control board. I shut it down and smelled something electrical burning. After a day or so I tried to start the oven it sounded as if it was going to turn on but it did not. How do I know which part to repace it with?
1 Answer Hello Simon. The only way to determine the issue is to access the board and look for burnt places. If none is found, then you will test and see where you are losing the power at on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...