Barbara Torre September 11, 2015 We have a 20 year old mobile home. The original range was a Magic Chef, but we had to replace it. The exhaust hood over the current range works well,I believe it is a Magic Chef hood, but it needs a grease filter. It (filter), is about 8"x101/4. Can you help?
1 Answer Barbara, The closest we can get is a Broan aluminum filter that measures 8X10 Inches and is 3/8 in. thick. at one time Broan did produce the Magic Chef range hood. Read More...
1 Answer Rajib, The part number for the grease filter is WP707929 and to order you can either order on the website appliancepartspros.com or call the toll free number 877-477-7278 Read More...
1 Answer Doug, to verify the correct filter available for your appliance we'll need the appliance model number. Please obtain this information and repost for further assistance. Thanks. Read More...
Sherry April 17, 2014 for Model Number cook top magic Chief vent We have modular home that has a cook top oven with a large down vent with a missing screen that sits over a framed area that has the light and vent system of approximately 20 1/2" x 30" that I would like to replace in the large upper venting system. The oven in Magic Chief gas and I assume the venting system is the same. Thanks.
1 Answer Hello Sherry! To verify the correct parts used on your appliance we'll need your appliance model number. Please obtain this information and repost for further assistance. Thanks! Read More...
George E December 31, 2013 for Model Number CVG316B Please should the filter fit vertically, snug against the fan? Currently, it's loosely placed on a diagonal over the fan hole. Please advise, and thank you!
1 Answer Hello George. No, the filter does not fit tight into the slot, but should cover the hole and collect the grease. Read More...
Candice October 14, 2013 I have a Kenmore range hood fan model # 850.5337362 and I'm looking for the filter or one that would fit it. Thanks
1 Answer Hello Candice, The part numbers for the charcoal filter for this model is 17921 and the aluminum filter part number is 18031. I'm sorry but both of these have been dis-continued by the manufacturer and no satisfactory substitutions have been provided. Read More...
John B. August 28, 2013 for Model Number Dacor RV30S I have a 30" Dacor gas cooktop (CABP3) that has a downdraft tower vent (RV30S). Can you help me find filters for the unit? It is approx 7" x 241/2".
Mrs.Mohamed December 28, 2012 Does Kenmore make filters (grease)10 X 12? I do not have my model number and my range hood requires (2) 10 X 12 filters.
1 Answer Hello, Without knowing your model number, it's difficult to say for sure but this filter kit S97007894 of (2) filters appears to be close to the dimensions you need. Hope this helps! Read More...
1 Answer Stacy, the manufacturer suggests to replace the filters every six months to a year depending on the usage of your appliance. Thanks. Read More...