Nelson August 17, 2012 for Model Number MDB5600AWB I AM REPLACING MY BLACK FRONT PANEL WITH A STAINLESS STEEL PANEL #AP4364097. I have instructions that say take out the 8 screws on the side of the door and lean the front panel out. My problem is that it looks like the old panel goes up behind the top control panel section by about an inch or so on the top side. How does that front panel just "lean out"? Do the 2 top screws allow the control panel to be loose enough for the front panel to really just "lean out" or does the whole control panel have to come off?
1 Answer Nelson, In short, you'll need to dismantle the complete door assembly. to replce the front panel. We'll be sending you some information that should be helpful. Thanks Read More...
Matthew M. July 06, 2012 for Model Number MDB8600AWQ If I replace the stock bisque front panel, control panel, and toe panel with: AP4364097, AP4365044, and AP4365232. Will that make a complete conversion from bisque to stainless? My dishwasher cleans very well, but the kitchen's being remodeled in stainless.
1 Answer Matthew, to convert the unit to stainless/black you will need the control panel 6-917713, handle/latch WPW10130695, door panel 6-917696, toe panel WP6-917688 and access panel WP6-918113. Thanks! Read More...
Ken June 25, 2012 for Model Number MDB7600AWB I am looking for a stainless front panel for this model and instructions on how to install.
1 Answer Hello Ken! The stainless door panel is part number 6-917696. Please check your inbox for an additional email for a copy of your service manual. This will give instructions on how to change the panel. Thanks! Read More...
Jmeil June 25, 2012 for Model Number MDB7600AWB Is there a stainless steel front panel and kick plate for this model?
1 Answer Hello! The stainless front panel is part number 6-917696. The control panel 6-917713 and kick plate and toe panel WP6-917688 on the stainless models are only offered in black, no stainless available. Thanks! Read More...
Debbie April 17, 2012 I have a Whirlpool Quiet Wash. I need a new black upper and lower panel for the door.Do you have this in stock? It is an under the counter model.
1 Answer Debbie, we will need your appliance model number to verify the correct parts used on your appliance. Please obtain this information and repost for further assistance. Thanks! Read More...
J March 30, 2012 for Model Number MDB6601AWQ Will this panel fit my Maytag dishwasher? I see it listed as compatible with MDB6601AWQ46 and want to be sure it will fit before I order. Thanks!
1 Answer J, the equivalent model to MDB6601AWQ is model MDB6601AWS. The stainless panel is part number 6-917696. Thanks! Read More...
Carol Gordon February 27, 2012 for Model Number KUDS01ILBL3 Is there a stainless steel replacement front panel or panel cover for this KitchenAid undercounter dishwasher (currently black)KUDS01ILBL3? This is for the big front area below the control panel. Thanks!
1 Answer Hello Carol. The part number for the stainless panel is W10301577. Hope this helps! Read More...
Kathy R. January 08, 2012 for Model Number MDBH945AWW Would like to replace my white one piece wrap around door panel (MDBH945AWW) to stainless steel. Will leave control panel white.
1 Answer Hello Kathy. Based on the model number you provided, 6-917696 is the correct stainless panel. Hope this helps. Read More...
Madhavi December 22, 2011 for Model Number Kitchenaid Imperial21 We need to replace the front panel for this dishwasher and it is like in two parts one is 23by 19 and other 23 by about 7inches will this panel work?
1 Answer Hello Madhavi. We will need your model number to help you with this. Thanks. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Rey November 12, 2011 for Model Number MDBH940AWB I want to replace the front door panel with stainless steel. Will the AP4364097 work? Your site's part number for this MDBH940AWB model listed the original black panel as AP4364243.
1 Answer Hello Rey! Yes, the replacement stainless door panel 6-917696 is the correct replacement. Thanks! Read More...