Ron January 18, 2023 for Model Number kgss907xsp00 None of the 4 burners on the cooktop ignite when I turn on the knobs. Is that usually caused by the switch harness AP6013958 or the spark module AP6019728?
1 Answer Ron,To determine the issue I would suggest using a multimeter to check the continuity of the harness and switches. If they check ok, then the likely issue would be the spark module. Read More...
Dennis D. January 15, 2017 for Model Number KGRK806PSS00 How come my big burner won't light up but the other 3 works fine? I am thinking it is the ignition switch/harness problem but the part WP9756824 only comes with 3 switches. Need help. Thanks.
1 Answer Dennis, The triple burner on your unit does not have the same square ignition switch as the other burners and just has a microswitch on it that only comes with the valve part number WP9760519. You would want to make sure that the burner cap and burner head is clean if the unit will spark but not light. Also check the orifice to make sure that the orifice is not clogged. The ignition switch would be the most likely cause for the issue. Read More...
Ronald S May 08, 2016 for Model Number KGSA906PSS00 I'm having an issue where the back right burner sparks intermittently when I turn the appropriate knob. However if I use other knobs, the back right burner sparks normally like it should. I suspect the wire harness is the issue, but wanted to check if there are any other components in the line that could cause such an issue to occur.
1 Answer Hello Ronald. Based on the information you provided the only thing it could be is the wiring harness WP9756824 on the unit. Read More...