Chris January 11, 2024 for Model Number LAT8026AAE My washer will spin and drain but wont agitate. i have changed and adjusted the belts. the agitator dogs are good and the coupler is fine . after the machine fills nothing happens until spin time. Could it be the Water level switch?
1 Answer Chris, during an agitation cycle, the timer WP22002181 (part has been discontinued by the manufacturer and is no longer available) would need to be tested for 120VAC from the yellow wire to the blue wire. If there is not voltage, the next step would be unplugging the power supply cord and testing the water level switch while the tub is full of water. There should be continuity from the yellow-wired terminal to the gray-wired terminal. If there is not continuity, the pressure switch WP22001776 has failed. If the pressure switch does have continuity, the timer has failed. Read More...
Ed G April 14, 2015 for Model Number LAT3500AAE When washing is done, it keep dripping water, is the hot and cold have separate shut off Ed
1 Answer Ed, The hot and cold water have separate solenoids but they are on one valve. If the unit is dripping then you would need to replace the water valve. Read More...
1 Answer Yes, this part will turn the water valve off once it has reached the water level desired for the cycle selected. Read More...