Donna July 04, 2012 for Model Number MAH5500BWW Which door latch assembly do I use if my Serial # is A2934425CR?
1 Answer Donna, according to your model/serial number the replacement door latch assembly is part number WP22003593. Thanks! Read More...
Bill April 18, 2012 for Model Number mah5500bww Maytag neptune washer model # mah5500bww. ser. # a5939317cr. I need to replace door latch assy. door has to be slammed to operate and occassionally stops with 'FL' appearing on controls. looking for correct part number. Thank you for your help.
1 Answer Hi Bill. This is the latch assy. that you need. Latch, Assembly Door Item Number: WP22004435. The FL code is failed lock. Make sure the unit is level front to back and side to side. Lock the level legs. So in the future the machine does not allow the door strike and latch to misalign. Thank You. Read More...
Gerald February 13, 2012 for Model Number Maytag MAH5500BWW ser. A2901574CJ Two door latch assemblies are listed. Which one is for my ser. no.? Any ideas on why this part has failed 3 times in the past 10 months? The original lasted nearly 10 years. I replaced it and that one only lasted 4 months. The supplier replaced it under warranty and the replacement only lasted 6 months. They claim there has to be something else wrong with my machine, but the new latch assembly has fixed it each time. The failure symptoms were always exactly the same. The actuator locks the door, but then doesn't hold. Gives a 'do' code and eventually a 'FL' code. It keeps clicking and buzzing while trying to lock the door. It starts out by making several attempts before it finally latches. Eventually it gets to the point where it will not latch at all. The current one will still latch but it is taking more and more attempts each time.
1 Answer Hello Gerald. Based on the model and serial number you provided, WP22003593 is the correct door latch assembly. Check and see if there is water getting on the latch assembly and is shorting it out over time. Also, try not to start and stop the washer once the cycle has started. Hope this helps. Read More...
Denise D. November 11, 2011 for Model Number mah5500bww You have two door latch assemblies in your parts list. Which one do I need to fit my machine with this serial #a5937713cr?
1 Answer Hello Denise! The door latch assembly used on your model/serial is part number WP22003593. Thanks! Read More...
Oscar October 20, 2011 for Model Number MAH5500BWW If I may ask, what would cause my Neptune MAH5500BWW to stop and unlock door when it gets to the spin cycle? The lead light will say FL when it shuts it self off. It doesn't run now, but the lights turn on. I would purchuse what I need if you know and tell me whats wrong.
Paul October 11, 2011 for Model Number MAH55FLBWW Is this the correct door lock/latch for our Maytag Neptune washer?
Tony P. October 02, 2011 for Model Number MAH5500BWW Where does the other end of the florescent green monofilament line on the door latch assembly connect to.
1 Answer Hello Tony. The end of the latch assembly WP22004435, lays on the outer edge inside the dispenser. That way you can get to it and release the door if it wont unlock. Hope this helps. Read More...
John J. September 21, 2011 for Model Number MAH5500BWW My serial number is 88925110AJ, which of the latch part numbers is correct?
1 Answer Hello John. Based on the model and serial number you provided, WP22003593 is the correct door latch assembly. Hope this helps. Read More...
Amy September 06, 2011 for Model Number mah55flbwq What is the correct door latch for this maytag neptune?
1 Answer Hello Amy! The door latch assembly used on your Maytag Neptune model MAH55FLBWQ is part number WP22004435. Thanks. Read More...
Kenny September 04, 2011 for Model Number MAH5500BWW My serial # is 10767106yz. Is this the correct latch? Thank you.
1 Answer Hello Kenny! No, the latch part number WP22004435 is not correct. For the listed model and serial number the door latch assembly you will need to use is part number WP22003593. Thanks. Read More...