Katherine Webb July 31, 2014 for Model Number notsure but it a 7 cycle roper by maytag washer please help me out,where is the holes for the screws that holds this switch to the washer or are the screws a self start in to the switch . i don't want to mess up the switch.
1 Answer Katherine, The lid switch on this unit is a clip in place switch and would not have a screw that holds it in place. Read More...
Katherine July 28, 2014 for Model Number na.roper bymaytag7cycle washingmachinelike in videorepair Is lid switch bad when it will fill with water, washer starts, agitate an then will not go to spin cycle. But move cycle to rinse and will put more water in but stops after that an will not spin out water.
1 Answer Hello Katherine. Yes, if the lid switch is bad, it could cause the washer to do that. You need to check the lid switch. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Moo August 26, 2011 for Model Number LAT9356AAE Washer filled with water,then cut off,doesnt do a thing. Is it the lid switch?