Charles Duncan October 03, 2018 for Model Number amana #amc5143aab I have a bulb #t170 (125v25w)what is te replacement part #
Peggy September 28, 2015 for Model Number whirlpool electric combination LOWER OVEN Model GMC275 I need to order a replacement lightbulb. What bulb do I need?
Jim D August 23, 2015 for Model Number JMC9158AAQ Where in the world is the light bulb on this JennAir microwave?
1 Answer Hello Jim. You need to remove the outer cover off the microwave and the lamp WP8183592 is mounted in the cover inside the body of the microwave. Read More...
Bill July 10, 2015 for Model Number Whirlpool Microwave model #WMC50522AS What light bulb do I need for replacement?
1 Answer Hello Bill, I'm sorry but the manufacturer offers no replacement parts list on this unit. Read More...
Brenda June 12, 2014 for Model Number KBHC109JSS04 What bulb do I need for replacement in my kitchenaid microconvection oven. Also, is this something I am able to do and how is it done? Thank you Brenda
1 Answer Brenda, To replace the light in you oven you will need to pull the unit out from the wall. Remove the top cover and replace part number WPW10440740. Read More...
Bill January 27, 2014 for Model Number Jenn Air JMC8127DDS What are the steps in replacing the lamp and what is the correct lamp part number? Thanks
1 Answer Bill, To replace the lamp in your microwave you will need to pull the microwave from installation and remove the top. The light will be accessible from this point and the part number needed is WP8183592. Read More...
Robert December 06, 2013 for Model Number Whirlpool GM8155XJB How do disassemble the Whirlpool Microwave Convection Oven to replace the lamp AP3038375 (8183592)?
1 Answer Hello Robert. You will need to remove the outer cover from around the microwave. Once removed, you will see the lamp assembly 8183592 on the right hand side. Remove the assembly from the housing and install the new assembly. Read More...
Eric July 15, 2013 for Model Number Maytag UMC5200AAB What is the Light Bulb # , cost and how do I replace it? Is it available from you?
1 Answer Eric, The lamp part number for your unit is {AP3038735]. To replace the lamp assembly you will need to disconnect the power. Remove light shield and take 2 screws out that hold the lamp assembly in placed. It may be necessary to drop the bottom of the oven to get the part out. Disconnect the wires and install the new lamp. Read More...
Sean December 18, 2012 for Model Number JMC9158AAS Hello, is there a certain technique I need to use to remove the lamp assembly from the housing? I am having problems, and do not want to pull any wires free from the housing in my efforts. Thanks in advance
1 Answer Hello Sean, You would just pull down and disconnect wires then reconnect and put back into place. Read More...
Janie January 26, 2012 for Model Number JMC9158AAS Trying to open the back cover with Torx tool, but it has NO center hole/ indenture for the 'bellybutton' sticking out of the middle of the fastener. Please confirm that it is a SECURITY Torx, not a Hex fastener. What size am I looking for - some of the sets that say they are Security Torx sets, the T5 and T6 end up NOT being Security. Thanks for any help - have hauled the unit out of the ll three times now, for the wrong tool.