Penny December 26, 2011 for Model Number WTW660SW2 Every time we start the washer it will stop with a f-1 on it? What is going on?
1 Answer Hello Penny. The F1 code is for: F then 1 flashes when the control detects an out of range pressure signal. ? Check pressure hose connection from tub to machine/motor control. Is hose pinched or kinked? ? If F then 1 repeats numerous times after POWER is pressed and the pressure hose connection is not pinched or kinked, replace the machine/motor control WPW10189966. Hope this helps. Read More...
David B. December 09, 2011 for Model Number WTW6600SW1 I am not getting nothing when I hit the start button. The timer lights up, but hit start button nothing happens.
1 Answer Hello David. If the control panel is working, but some of the buttons do not work, you will need to replace the user interface WP8564290 in the unit. Make sure the door lock assembly is good on the unit. Hope this helps. Read More...
Larry October 16, 2011 for Model Number wtw6600sw2 Machine shows Lid code, lid is shut. I had a leak nearby, may have gotten wet. Let dry out for 3 days.
1 Answer Hello Larry. It sounds like the latch assembly WPW10619844 may be bad in the unit. If the lid is not locking, and the control board is good, you will need to replace the latch assembly. Hope this helps. Read More...
Howard September 12, 2011 for Model Number 110.27042600 The washer won't power up. The outlet is fine. I plugged a Radio to it.
1 Answer Hello Howard. Test and see if there is power coming to the control board WPW10189966. If so, and the unit will not power up, you will need to replace the control board. Hope this helps. Read More...
1 Answer Hello John! An LF failure code on model wtw6600sw1 indicates a Long Fill. Make sure that the water supply is still connected and turned on properly. Is there any water entering the machine? If so check pressure hose connection to machine/motor control. Post your information. Thanks! Read More...