1 Answer Hello Mary, WP16910 is listed by the manufacturer as the correct hinge pin for the model provided. Read More...
Norma August 11, 2015 for Model Number Kitchenaid mixer model K45SS My mixer has a screw to keep the hinge pin (AP3177631) in place. While trying to disassemble the mixer to move it, I lost the screw and now the mixer bounces around when I use it. I have been unable to locate the part on any diagrams. Is it available? Thanks
1 Answer Hello Norma, From all indications, WP110679 should be correct for this application. Read More...
Mary K January 24, 2015 for Model Number KSM150PSWW Kitchen Aid Artisan Mixer is leaking oil; is there a simple repair or fix for this?
1 Answer Mary, With the unit leaking oil you will need to add more planetary grease to the unit. The unit is low on grease and leaks out and adding more will correct this issue. Planetary grease part number is W11200218. Read More...
Nellie J August 12, 2013 for Model Number KSM150 Hinge pin fell out when turning on side. I am unable to insert pin. The pin gets hung up @ half way through opening....Please explain how to fix this problem....Thank You!
1 Answer Hello Nellie. Turn over the base and loosen the set screw so the pin will slide into place on the unit. Read More...
Nancy April 10, 2012 for Model Number KSM150PSEO Hinge pin came out when turned mixer on side. Is there an easy way to reinsert it? What is loctite? Thanks in advance
1 Answer Hi Nancy.The hinge pin is a upgrade part # WP16910. Insert the pin 80 %. Then use a little loctite on each opening and as you finish inserting it, it will have just enough on the circumference of the ends to solidify and hold the pin taught. Wipe all access if it drips. Thank You. Read More...
Lou B. December 20, 2011 for Model Number K45SS Hi. The Hinge pin Part Number: AP3177631 made by WHIRLPOOL, This PIN keeps moving out of location while the machine is in use mixing. What needs to be done to eliminate the pin above from moving? Best regards. Lou Bleggi
1 Answer Hi Lou. The hinge pin is a upgrade part # WP16910. Insert the pin 80 %. Then use a little loctite on each opening and as you finish inserting it, it will have just enough on the circumference of the ends to solidify and hold the pin taught. Wipe all access if it drips. Thank You. Read More...
Guest February 27, 2011 We have a KitchenAid stand mixer No. KSM90OB. We need a pin hinge but it is noted that Part Number WHIRLPOOL AP3177631 - Pin, hinge No longer available. The current hinge slides in and out. Someone has to hold the mixer steady so it doesn't bounce around. Is there some alternative? Thank you.
1 Answer According to the manufacturer the pin part number AP3177631 has become available for purchase again. Read More...