Robert May 23, 2019 for Model Number ge9800lw0 Trying to remove the front of the machine to get to the drive belt. I have removed the two screws on the top corners and pulled the front panel out a couple of inches. It seems to be attached with some sort of clip, but I don't want to stretch the clip by pulling in the wrong direction. Which way is right?
1 Answer Hello Robert,here are the toe panel removal instructions , Remove the two hex-head screws from the bottom flange of the toe panel. Pull the panel out at the bottom, pull down, and remove the panel. Read More...
Dennis August 02, 2012 for Model Number Wgd5600xw0 A Bounce sheet fell into the lint filter slot. It appears to be caught in the fan. How can I retrieve it? Thank you.
1 Answer Hello Dennis. You can usually use a dryer lint brush 8212614 to remove the sheet from the wheel and also clean out any lint in the unit. Read More...
Woody K February 05, 2012 for Model Number GEQ9800pw1 How do you disengage the access panel spring retainer to open the bottom panel? The bottom clips are already disengaged.
1 Answer Hello Woody. You will insert a flat blade between the clip WP3388229 and the top of the access panel. This will release the clip springs on the unit. Hope this helps. Read More...