Shannon February 28, 2012 for Model Number PAVT920AWW My screw is fine but the rubber on the back of the washer is shot. Is that one piece?
1 Answer Shannon, the rubber on the washer located on the screw WPW10309247 is all one piece. Thanks! Read More...
Helena S. November 10, 2011 for Model Number nav5805aww Can you tell me what the thread type on the screw part part number ap4511782?
1 Answer Hello Helena. Sorry, but the manufacture does not offer that information. You will need to contact the manufacture for that information on the screw WPW10309247. Hope this helps. Read More...
Lfive September 23, 2011 for Model Number pav2300aww I was removing the screw ( ap4511782 ) and it broke off and 1/2 of it stay in side the shaft . can I drill it out
1 Answer Ifive, That appears to be the agitator bolt, it screws through the agitator into the metal agitator shaft, you would want to attempt to carefully drill out the broken screw, otherwise you'll need to replace the complete transmission and associated parts. Good Luck and Thanks Read More...
Tbone May 31, 2011 for Model Number PAV2300AWW The screw, AP4511782, will not stay tightened and backs out during the wash cycles. Is there supposed to be a lock washer or something to keep this screw secure?
1 Answer Hello Tbone. The screw has thread lock on the threads. If it is backing out, you may need to replace the screw WPW10309247. Hope this helps. Read More...
Tana D. April 18, 2011 for Model Number PAVT234AWW Can you tell me what size the screw is for part #AP4511782? I need to know how long it is and the size of the top of it. I want to make sure this is the one I need. Thanks, Tana
1 Answer Hello Tana! The agitator retention screw WPW10309247 is about 1" long and the head is approx 7/16" or 1/2" hex head. This screw matches your model PAVT234AWW. This is the screw that goes inside the agitator to hold it down. Hope this helps! Read More...