Richard B June 12, 2013 for Model Number GHW9150PW0 I have adjusted the door strike but the unit does not lock the door and the washer will not start. The part seems to be intact. If not the strike, could there be another problem? the receiver or female part on the machine? I also get the DL error code. Thank you!
1 Answer Hello Richard. If the stike goes into the lock and it does nto lock, you will need to replace the lock assembly on the unit. First make sure the wiring harness is good on the unit as well. Read More...
Nadine H. February 09, 2013 for Model Number GHW9100LW When the door closes the washer will not start. I believe it is the part that is on the door that goes into the hole in the machine. Can you tell me what part this is?
1 Answer Nadine, the part on the door is the strike part number WP8181651 and on the machine is the lock part number WP8182634. Thanks! Read More...
Lewis C. August 24, 2012 for Model Number 110.44936200 Item # AP3128714 (door strike male piece to the door latch assembly)is the only part of the assembly unit shown. Is the other half(receiver box) of the unit for front loaders available, as well?
1 Answer Lewis, the door strike WP8181651 hooks into the door switch assembly WP8182634. Thanks! Read More...
Susan T January 25, 2012 for Model Number GHW9100LW2 The door error code DL is coming on. My repairman replaced the part PS972231, but the door is still having code DL some of the time. What other part would be connected? Maybe the Door Strike?
1 Answer Susan, You're on track, A loose or out of alignment striker could be the issue. Also check the door hinges and hinge screws for loose and proper alignment to the front cabinet opening. If all's OK, you'll need to check and make sure the wiring to the switch assembly and the CCU, are proper and tight fitting. Good Luck and Thanks Read More...