Heaseba October 22, 2013 for Model Number whirlpool 8268316 We have done everything up until and including removing the first SINGLE screw from the sump cover, however, the sump cover WILL NOT lift out. There are no more screws to remove.
1 Answer Hello Heaseba. If all screws are removed and the water tube from the top tp manifold is removed, then the sump cover will lift out. You need to double check for parts holding the cover in place. Read More...
David June 24, 2011 for Model Number GU1100XTLB1 How do I remove the lower spray arm and hub in order to expose the chopper assy?
1 Answer David, Here are some instructions to assist you in removing the lower arm assembly and accessing the chopper blade : 1. Remove the two (2) dishracks from the dishwasher tub. 2. Remove the two (2) screws securing the Inner Feed Tube to the inside of the dishwasher tub.3. Rotate the rear feed cap ¼ turn clockwise. 4. The entire inner water tube assembly and the lower spray arm assembly can now be removed from the dishwasher tub. Accessing Components of the Sump Assembly, Components inside the sump can be accessed without removing the sump from the dishwasher tub. 1. Remove the four (4) screws securing the soil accumulator from the sump base. 2. The soil accumulator will now lift free of the sump base.3. Remove the screw securing the foreign objects protector to the sump base and remove the protector. 4. Remove the screw securing the inlet protector to the pump base and lift the inlet protector out.5. Remove the chopper assembly from the impeller shaft and lift it from the sump base. 5. Remove the chopper assembly from the impeller shaft and lift it from the sump base. Good Luck, and Thanks. Read More...