Bob March 19, 2012 for Model Number JES9860BAW What is the part number for the screws to hold the switch, Infinite (Part Number: AP4100533) in place?
Rosepedaler December 18, 2011 for Model Number JES9860BAB How do you replace the infinite switch? Do I remove the top of the range to get access to move the old? Is it just a plug-in (and screw to the front of stove) once I get access? Thanks
1 Answer Rosepedaler, Your on track, here's some help ; "Control Panel 1. Remove power from unit. 2. Open oven door and remove screws securing control panel. 3. Remove screws located on the right and left sides of the control panel. 4. Grasp control panel on the far left and right sides and gently pull the control panel out and down. NOTE: Gently pull control panel out and down. 5. Remove infinite switch control knobs, infinite switches, indicator lights, rocker switches, and electronic control/clock (as necessary) and transfer to the new control panel. 6. Reverse procedure to reinstall control panel. (it's a good idea to label any wires that you disconnect). Infinite Switch 1. Remove control panel, see "Control Panel" procedure for removal. 2. Label and disconnect wire terminals from infinite switch. 3. Remove knob on infinite switch being replaced. 4. Remove screws in front securing infinite switch to control panel. 5. Reverse procedure to reinstall infinite switch. ". You'll be up and running in no time. Thanks and Good Luck Read More...