Cornel March 31, 2015 for Model Number LSR8010PT0 Regardless where I set the temperature, hot or warm, I only get cold water. Can you please help?
1 Answer Hello Cornel, You should try running the hot water as close to the machine as possible. If the water heater is on the other end of the house, it could be full before the hot water heats up the plumbing and reaches the machine. If this is not the case, it is possible for the hot water valve 285805 to be defective. You should also check the water temperature switch WPW10168256. Read More...
L.W. July 19, 2014 for Model Number TAWS700EQ1 When using cold water, fill pulsates and barely any water comes out with each pulse (unable to use cold water fill option). Functions fine on hot and warm. Checked hose and water flows freely and there are no obstructions in the screen.
Newmantwo March 12, 2013 for Model Number whirlpool roper Need to know what color wire controls the hot water. I just want to use warm water so I don't have water heater working.
1 Answer Hello newmantwo. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Ernie July 10, 2012 for Model Number LSQ9244EQO Cold water on my washing machine is not coming out but if I switch to hot ,hot water come out. It could be water temp. switch the problem pls. help
1 Answer Hello Ernie. Check and make sure the screens on the valve and if there are any in the hoses are clear and the cold water flows good. If so, you will test for power coming to the water valve. If there is power there, and the water does not come out, you will need to replace the water valve 285805 on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
M Cooper May 18, 2012 for Model Number 110.27831600 What determines the water temperature in my machine? All rinses are supposed to be cold, but sometimes the water is hot. When I select a wash cycle temperature sometime I get what I selected; sometimes not. For example, today I selected hot wash. The wash water was cold and so was the rinse. For my first wash, the rinse water was hot.
1 Answer Hello Mcooper. The water valve uses a thermisot for this. If the unit is acting up like you are describing, you will need to replace the water valve WP3979346 on the unit. Read More...