Nancy March 26, 2020 I have a Kenmore oven that I took the front glass off to clean and now it won"t stay on. I accidentally took the sticky stuff off thinking it was grime. There are no brackets to hold this glass piece Model # 790-468-22-100. Thank you, Nancy Johnson
1 Answer Nancy, There is a piece of trim that should be on the bottom of the door glass which would hold the door glass in place. Unfortunately, we would not have a double-sided tape that we could recommend but any tape would need to be hi-temp. Read More...
Ang November 23, 2019 for Model Number WFG320M0BB0 Will this double-sided tape work on the outer glass of the oven door? It's separating from the 3 pieces of tape to the point it actually prevents the door from opening...
1 Answer Ang,This part is not listed in your parts breakdown but it is tape for another door so there shouldn't be a problem. Read More...
Jeff November 12, 2018 for Model Number KEBC107KSS05 I'm purchasing the replacement outer glass at is broke while trying to tighten the loose handle screws. What additional tape do I need to install the new glass? Thanks
K December 25, 2014 for Model Number MGR5775QDQ I am replacing my glass and not sure how many pieces of tape you get? It appears I'll need 6 pieces of double tape to replace glass, is that what I'm getting or do I have to order 6 in the quantity? Then how much single sided tape are you getting for the price, not just one little piece? Description is not helpful.
1 Answer K, the double sided tape comes with one 1" x 1/2" (approx.) piece of tape. From the model given, your unit uses two of these and six of the single sided tape, part number WP74004224. Thanks. Read More...
Teresa June 05, 2011 for Model Number MERS755RAW Is the door easy to replace? Part ap4099741 - outer door glass.
1 Answer Hello Teresa. Here are the instructions from the manufacture. Hope this helps.Frameless Door Disassembly1. Remove oven door.2. Place door on a protected surface.3. Remove screws securing bottom trim to oven door.4. Slide outer oven door glass and trim towards thebottom of the oven door and remove.5. Detach right and left trim pieces for outer door glass.NOTE: Proceed with the following steps for door hinge,door handle, and inner door disassembly.6. Remove screws securing door hinge to oven doorchassis.NOTE: Proceed with the following steps for door handleand inner door disassembly.7. Remove screws securing top door handle trim tooven door chassis.8. Remove screws securing door handle brackets toinner door panel.9. Lift upward on the lower side of the door handle torelease side alignment screws and rotate towards thetop of the oven door to release and remove.10. Remove screws securing door handle to door handlebrackets.NOTE: Proceed with the following steps for inner doordisassembly.11. Remove screws securing lower door glass retainer todoor baffle and remove.12. Slide inner door glass downward to release fromupper door glass retainers and remove.13.Remove screws securing door baffle to door liningand remove.14.Remove insulation from oven door.15. Lift inner glass and glass frame from oven door.16. Reverse procedure to reassemble oven door. Read More...