Tom July 19, 2021 for Model Number 10671192100 Hi, which terminal does the defrost timer flying lead attach to? Thank you!
Max July 16, 2021 for Model Number Whirlpool refrigerator et18nkxfw04 Hi, What contact does the black wire go on? Thank you!
1 Answer Max, Thanks for the question!!! The black timer wire will go to terminal 2 for your model. Read More...
Carl July 15, 2021 for Model Number RT14KXKQOO Got a new timer. It has a black wire. I have seen it is suppose to go on one of the plugs in a video. But the man had a sheet with different setups. sheet I have gotten does not give enough detail. What contact does the black wire go on?
1 Answer Carl, The black lead should go to terminal number 1 for your model refrigerator. Read More...
Bill C. July 15, 2021 for Model Number ED5FHGXKQ62 New defrost timer. W10822278. Which terminal should have the black wire attached to it? Thanks
1 Answer Hello Bill, You will need to place the black jumper wire on the new defrost timer on terminal number "1". Read More...
1 Answer Hello Don, The black jumper wire on the defrost timer should be installed on terminals "1". Read More...
Mark July 02, 2021 for Model Number Coldspot 106723240 Where does the black wire connect for this coldspot upright freezer. W10822278 is the part we have. Thank you
Jim July 01, 2021 for Model Number Kenmore 1069722680 The defrost timer was beginning to get stuck causing the freezer to get above freezing. Never know when this is going to occur. Been working for several days straight now. Installed a new timer and the unit will not come on when plugged in. Put the old one back in and it runs. Put the new one back in and it will not start up. Any suggestions?
1 Answer Jim, it is likely that the timer is in a defrost position from testing at the manufacturer. The timer will have a rotating disc that can be rotated until it clicks. Once it clicks, the compressor and fans should come on as normal. Read More...
Howard June 18, 2021 for Model Number ED20TQXFN01 Good afternoon, Just replaced the defrost timer which did not come with any instructions----put the black wire on terminal 2 (I think)---the defrost cycle appears to be too long resulting in freezer temp above freezing. When I move the adjusting screw on the timer the compressor starts again and the freezer cools down properly. Do I have the black wire attached correctly or does it go on #1 Thanks
1 Answer Howard,Based on the information provided the loose black wire should be on terminal # 1 Read More...
Mark June 17, 2021 for Model Number Whirlpool ED25CQXFW01 I'm having the same issue regarding the black wire. It's a Whirlpool ED25CQXFW01 (MFG DATE 10/98)and the original defrost part number is 2176648 and I'm replacing it with your part 483212. Which terminal should I use? Would you also confirm which wire colors mate to the numbers on the connection? Thank you!