Brian March 24, 2021 for Model Number 106 50502990 I'm installing timer part number W10822278. Where do I connect the black wire on this refrigerator? Thanks Brian
Anna March 08, 2021 for Model Number 10672864 Replacing Kenmore freezer on top refrigerator model 106.72864100 with a new timer model w10822278 and it did not have the instructions. Where do I place the black wire?
Frank March 01, 2021 for Model Number Whirlpool upright freezer, Model EXV20NWR1 In replacing the defrost timer, please identify which terminal the single black lead should be attached. After 60 pages of Q and A's, I guess there are not many folks with this model. It was made back in 1973/74 and has been running fine until recently. It is not cooling properly (had to toss out the food) and am trying to fix. The evaporator motor is fine , next step is the timer.
1 Answer Hello Frank,check the wires going to the defrost timer if one of them is white then connect the jumper to terminal 1, if no white wire connect the jumper to terminal 2. Read More...
Britney February 27, 2021 for Model Number ED25RFXFW01 I did not get a diagram with my part, and like others am looking to know which terminal I place the wire on for my defrost timer
Michael February 27, 2021 for Model Number ED22TEXHN00 Which prong does the black wire connect to on our refrigerator?
1 Answer Michael, the black wire would be placed at the terminal 1 for the model provided. Read More...
Bill February 27, 2021 for Model Number 106.8579280 Where does the black wire go on this timer. Pin 1 or Pin 2 ?
1 Answer Hello Bill, You will need to put the black jumper wire on terminal 1 on this timer for proper operation. Read More...
David February 25, 2021 for Model Number ED20TKXFW01 I am replacing the defrost timer in a Whirlpool ED20TKXFW01. Which terminal do I need to connect the black wire to? Thank you.
1 Answer David,Based on the model number the loose terminal should be placed on terminal number 1. Read More...
Jerry M. February 20, 2021 for Model Number Kenmore 106.73853302 Black Jumper wire what terminal? Package did not have the instruction sheet in it,
1 Answer Hello Jerry, The black jumper wire should be placed on terminal 1 for a defrost cycle every 8 hours. Read More...
Floyd February 18, 2021 for Model Number TFF22DNC Have new timer, wr9x480, has two black wires. One comes from the side the other is like a jumper to go between terminals, Don’t know what to do with them
1 Answer Hello Floyd, Connecting the black jumper lead to terminal number 1 will provide a defrost cycle every 8 hours. This is the preferred connection that technicians use. Read More...