Bob M February 06, 2019 for Model Number W4TXNWFWQ03 installing new defrost timer part # w10822278 which connector do I install the black wire on to ? 2, 1, 4, or 3
Paul February 01, 2019 for Model Number whirlpool et6skxkq00 I ordered ap5985208 defrost timer. No instruction sheet came with it. I tried to load the instruction sheet from your site and it will not load. I have a timer plug that is red,orange,black,pink. What terminal do I put the jumper on.
John January 24, 2019 for Model Number ET16JMXBW00 My timer came with no instructions. where would the black wire go on this model?
1 Answer John, For this model the black lead wire will go to terminal number 2 of the timer. Read More...
Roscoe January 23, 2019 for Model Number ED25cqxfn01 I just purchased a defrost timer ( W10822278) and it didn't come with directions on where to attach the black wire. My Model # is ED25cqxfn01
1 Answer Roscoe, look at the wires that connect to the timer, if you have black, pink, red, and orange wires, put the black lead to the #2 position. If you have orange, pink, white and red wires, put the lead on the #1 wire. Read More...
Brian January 18, 2019 for Model Number 106.9555751 Just installed the replacement timer and connected the black wire to terminal #2 as suggested. The refrigerator came on and ran for a couple of hours and then shut off. It's been several hours now and it still is not running. The temperature in the freezer has gone up to 38°F and the refrigerator compartment is at 54°F. Could the new timer be bad, or is the thermostat the next place to look? Thanks
1 Answer Hello Brian, I would try running the unit with the black jumper lead connected to terminal #1 as shown in the instruction sheet for a continuous run configuration. This should solve the problem. Read More...
Brian January 18, 2019 for Model Number 106.9555751 What happens if you put the black wire from the new defrost timer on the wrong terminal? And how long before you realize it's on the wrong terminal?
1 Answer Brian, The only thing that it would do is cause the unit to not advance into defrost and would normally show in about a week. For your model the black lead wire should go on terminal number 2. Read More...
Brian January 18, 2019 for Model Number 106.9555751 Just bought this replacement defrost timer (W10822278) for our Kenmore side by side. I cannot figure out the wiring diagram in order to place the black wire on the new defrost timer to the correct terminal. Since it's either #1 or #2, I've got a 50/50 chance, but I would like to get it right the first time. Your help will be greatly appreciated!! Thanks, Brian
1 Answer Brian, for your model, you will want to connect the black wire to terminal 2 on the timer. Read More...
Dale January 17, 2019 for Model Number ED22TQXEW00 My old timer didn,t have black wire . New timer 482493 . where does black wire go?
1 Answer Dale, Follow the instructions for procedure 2, Black timer motor wire wire will attach and slide down the no.2 terminal, the wire harness black wire will attach to terminal no.1, the pink wire attaches to terminal no.2, the red wire to terminal no.3 and the orange wire will attach to terminal no.4. Thanks, Read More...
Emil January 17, 2019 for Model Number ET4WSKQ01 On refrigerator model number ET4WSKQ01, where does the black wire for defrost timer W10822278 go? Which terminal? Thanks, Emil
1 Answer Emil, the black wire on the timer will go onto the same connection as the red wire for your model. Read More...
1 Answer Hello Mark, for the model number supplied the loose black wire on the timer goes on terminal #1. Thanks! Read More...