Matt W January 31, 2026 for Model Number LSC8244EQ1 Hot Water does not flow UNLESS Hot wash - hot rinse is chosen. Then hot flows fine. A WP3955728 Washing Machine Temperature Control Board is listed as possible culprit. where is this item located i the machine? opened top control panel and back panel exposing water valves. I do not see this circuit board anywhere. Thank You in advance
1 Answer Matt, This would be the touchpad part number 3948147 which, unfortunately has been discontinued by the manufacturer with no suitable replacement available. Read More...
Debbie November 24, 2021 I need a timer for a whirlpool washer part 3948171-can't find it anywhere-can another timer be substituted?
1 Answer Debbie, Thanks for the question!!! The manufacturer has offered no replacement for this part. You may find one available in an internet search, the part may be new or used. Read More...
Ángel July 10, 2021 for Model Number 7LSR8244FQ1 Dear sirs: I hope you are healthy, I want to buy a timer for a washing machine model 7LSR8244FQ1 or a substitute timer, I will thank your support. Best Regards. Ángel
1 Answer Ángel, unfortunately, as this model is not manufactured for use in the US, we are unable to identify the correct part necessary due to very limited information on this model. Read More...
George August 18, 2015 for Model Number LSR7233DW0 Is it possible to order a replacement motor for the timer? The timer number is 3948171. Thank you
Dean B March 29, 2014 for Model Number LSC8244EQ0 Machine fills & agitates then the timer stops & will not pump out or spin. Advancing the timer manually, it still will not pump out or spin. Is this a bad timer?
1 Answer Hello Dean. You need to check the lid switch 3949247V and see if it is bad on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...
Isaac January 07, 2014 My washer works but when is time to rinse, it stops. Should I change the timer?
1 Answer Hello Isaac. You will need to check the lid switch and the water valve on the unit. We will need your model number to help you more with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Johnny February 08, 2013 for Model Number lst8244bq0 Where can l locate a video on replacing the timer on MODEL LST8244BQ0 (Whirlpool Washer)
1 Answer Hello Johnny, The following link will tell you how to replace the timer on your washer. http://www.youtube.com/watch?v=DsP0hjQfBfA Read More...
Arthur C December 12, 2012 for Model Number SAWS800HQ (Costco #255569) On delicate cycle, it fills, and washes, but it fails to advance to drain. If manually advanced toward rinse, it, drains, and refills, but stops and does not drain again or advance to spin. If again manually advanced, it will drain and spin. This only happens on gentle cycle.
1 Answer Hello Arthur. Based on the information you provided, it sounds like the timer WP3948171 is bad and will need to be replaced on the unit. Read More...
Ivan F. March 04, 2012 for Model Number SAWS8000HQ0 Water does not fill when cylcle is started, it goes straigt to agitation. What could be wrong - Appliance Controller?
1 Answer Hello Ivan. Based on the information you provided, it sounds like the pressure switch W10337780 is bad and will need to be replaced. Hope this helps. Read More...