Degee September 18, 2017 for Model Number KAWE577BWH1 My washer washes for a while then quits. Sometimes if I turn the control knob it will come back on, sometimes it will come back on by it s self. Do you think its the timer/control panel? Thanks Degee
1 Answer Hello Degree. Yes, based on the information you provided, it sounds like the timer is bad and will need to be replaced on the unit. Read More...
David July 07, 2015 for Model Number KAWE577BWH1 How do you take out the timer from the panel with this model?
1 Answer Hello David. Unscrew the knob from the timer. Remove the 2 screws in the corners of the control panel. Unplug the unit and flip the control panel backwards by pulling forward and lifting on the front of the control panel. Now you can access and replace the timer. Read More...
R M November 20, 2014 for Model Number KAWE570BAL0 My washer works fine during the wash cycle but won't go to the rinse cycle ..it just stops after the wash cycle.
1 Answer RM, First check the lid switch assembly 285671 The lid has to be down and the switch has to have a "closed" circuit for the timer to advance into the drain and spin cycle. Make sure the switch assembly hasn't dislodged from the top panel bracket. Read More...
Javier November 19, 2014 for Model Number KAWE570BAL0 My washer machine wont go into the washing cycle, it skips the cycle and moves on to the spin cycle and other parts of the cycles are dead, they wont do anything at all. Can this be that my timer is bad?? Thanks.
1 Answer Hello Javier. Yes, based on the information you provided, it sounds like the timer is bad and will need to be replaced on the unit. Read More...
Casey May 25, 2013 for Model Number kawe570bwhl I think we have trouble with the timer control on the washer.Sometimes when its on wash, its really on rinse and sometimes it starts to spin filled with water. Can you help? How do you change this part, If this is the problem. THANK YOU!
1 Answer Casey, You will want to check all of your wiring to make sure that there is are no loose connections or broken wires. If all the wiring checks ok then you will want to replace the timer WP3946455. Read More...
1 Answer Hello Frank, Remove the two screws in the front edges of the control panel. This will allow you to pull the control panel about 1/2 to 1 inch and raise it. Carefully flip the control panel and remothe two 1/4 inch head screws that secure the timer to the panel. Unscrew the knob and pull the knob skirt off, and slide the timer to release it from the panel. The re-installation is, of course. the exact opposite of the removal procedure. Read More...