John August 03, 2021 for Model Number 110.87511702 When we turn the dial on the dryer to select the cycles, the lights are showing up randomly and we can't get it to move to the right cycle. It's like the dial is real finicky or something. I used to be able to very carefully turn the dial and get it to stop on the cycle I want but I can't even do that anymore and now it will all of a sudden move to another cycle between loads. Is this a problem with the user interface control board?
1 Answer John, based on the information provided, the user interface control WP8565244 has failed and would need to be replaced. Read More...
Thomas July 07, 2021 for Model Number 11087562602 the word "start" on the start button has come off . Does the whole control panel need to be replaced or is the start button separate?
Ha January 15, 2015 for Model Number 11087562601 My HE2 drier frequently stops and displays a PF error message. Sometimes, we need to let the machine "rest" before we can reset the power. Recently, this has been occurring with greater frequency. Some of the on-line recommendations suggest that the Electronic Control board needs replacing, but this does not appear definitive. Please advise.
1 Answer HA, Based on the unit having a PF error, the unit is losing power to it that causes this and the first thing that you will want to check would be incoming power supply for the unit. If the power supply checks ok then check the connections at the terminal block to make sure that there are no loose connections. If the terminal block checks ok then the control board will be the most likely issue causing this failure. Read More...
Shawn August 20, 2014 for Model Number 110.87511702 My dryer does not start it beeps and the code F-01 comes up on the display. What does that mean?
1 Answer Shawn, The F-01 error code indicates a communication error between the control boards (F-01> F-01 flashes when there is a primary control failure. Check the control wire harness between the main control board (front)and the machine control board( left side inside the cabinet. If all's OK, replace the main control board WP8565244. Read More...
Jack April 06, 2014 for Model Number kennmore he2 dryer model number 11087562601 I do not need the whole electrical part. I need only the plastic housing that the mother board attaches to. my switches my mother board are all fine. a little piece of plastic on the start switch broke off. that's all. Looks like I can glue it back but wanted a new plastic housing.
1 Answer Hello Jack! Unfortunately, the plastic housing is not available separate from the electronic control part number WP8565244. Sorry about that! Read More...
Sirous December 11, 2012 for Model Number Mod #110.87562602 Dryer Electric Kenmore HE2 My dryer comes on up when I push the start button just beeps at me. Everything is on but does not start running.
1 Answer Hello Sirous. You need to test the thermal fuse and the door switch and see if they are good on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Read More...