Customer Questions and Answers for Upper Dishrack Wheel Assembly by Whirlpool

Arlin, The water valve resistance should be between 725O and 1200O of resistance, and with the resistance showing 1100O then it is within range. If the new float switch has failed then you will want to check power getting to the float switch as it sounds like it could be getting too much voltage in which case the control board would be the issue if the float switch is failing.

Randy, The upper rack does come with the rollers WP903093.

Hello Clementine. Based on the model number you provided, 99001454 is the correct upper rack assembly. It comes with the rollers. Hope this helps.

Hello Larry. You will need to pull the top rack out and release the clips WP99002135 on the ends of the rack rails. The clips has tabs on the rail that will need to be pressed in to remove the clips. Hope this helps.

Hello Tim. These wheel assemblys will work for either side. Hope this helps.

Hello Tim! If the right wheel is falling off the rack you may want to replace the wheel and axle to be on the safe side. The lower rack is part number WP99002780 this includes the wheel and axle. The upper rack wheel is part number WP903093, this also includes the wheel and axle. Thanks!