Amana Range ARGS7650E Won't start or doesn't start

The Oven Bake Igniter is an OEM replacement part for Whirlpool ovens and ranges. This igniter is responsible for sparking the gas or electrically heated bake burners in the oven. It ensures reliable ignition of the burners to provide consistent, even heat for baking.

Symptoms of a bad oven bake igniter include:

• Oven not heating up or baking as expected
• Unlit or intermittent bake burner flames  
• Safety devices interrupting the oven cycle
• Visible aging or cracks in the igniter

Note: This igniter has been redesigned by the manufacturer and may not appear as shown in the photo. The photo is for identification purposes only. The part received may need ceramic wire connectors, part number TJMA01165-1.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Top Burner Igniter is an OEM part for Whirlpool gas ranges. This igniter is responsible for generating the spark needed to ignite the gas burner, ensuring efficient and reliable cooking performance. It plays a crucial role in the overall functionality of the stove, enabling the burners to light quickly and safely.

Causes of a bad top burner igniter can include wear and tear from regular use, buildup of food or grease that affects its operation, damage from cleaning, and electrical issues such as power surges or faulty wiring.

Symptoms of a bad top burner igniter include:

• Burners not lighting or taking a long time to ignite
• Weak or no spark visible at the igniter
• Clicking sound without ignition
• Uneven flame or burners not staying lit

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Oven Igniter is an OEM part for Whirlpool ovens. It is responsible for igniting the gas burner to produce heat, which is essential for baking and broiling. The igniter heats up to a high temperature and then sparks to ignite the gas, ensuring that the oven reaches and maintains the desired cooking temperature.

You should replace the oven igniter if it becomes faulty. Causes of a bad igniter can include electrical failures, wear and tear from regular use, or damage from exposure to high temperatures. A malfunctioning igniter can prevent the oven from heating properly or at all.

Symptoms of a bad oven igniter include:

• The oven not heating up or taking longer than usual to reach the desired temperature
• The igniter glowing but failing to ignite the gas burner
• No visible glow from the igniter when the oven is turned on
• The oven producing a clicking sound without igniting

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This temperature sensor monitors internal temperature and relays it to the control so heating or cooling can be regulated. Replacing a faulty sensor helps restore accurate temperature control, consistent cycling, and dependable performance. What it does

• Measures compartment or cavity temperature and sends a signal to the control
• Helps the unit reach and maintain the set temperature
• Common failure symptoms: temperature too hot/cold vs. setting, long/short cycling, failure to reach setpoint, or related error codes
• Tests out-of-range for resistance/ohms when defective

• 1 temperature sensor

• Disconnect power before servicing; shut off gas
• Access the sensor; note wire routing and connector orientation
• Do not pull on wires; transfer any clips, grommets, or brackets from the old sensor
• Restore power and run any model-specific diagnostics or calibration if required

Medium top burner for gas cooktops that provides a mid-range 9,000 BTU flame, restoring even heat for everyday cooking. Ideal when the original burner is cracked, clogged, or not igniting reliably. What it does:

• Replaces a damaged or worn medium burner to restore consistent, even heat across the cooking surface.
• Provides a mid-range flame output for simmering, boiling, and general-purpose cooking.
• Improves ignition and flame stability when the existing burner lights weakly, unevenly, or produces noisy flames.
• Helps correct issues caused by clogged ports, warped burner heads, or visible cracks.

• Turn off the gas supply and power to the range before starting any service.
• Remove grates and burner caps, lift the old burner straight up, and seat the replacement burner fully over the valve stem.
• Do not force the burner into place; ensure burner ports are clear and aligned before testing.