Amana Range GBE56FB Element will not heat

This 8-inch surface burner element delivers heat on an electric cooktop or range. Replacing a worn or open element restores even heating on the burner zone and reliable response to temperature settings.

• Heats the 8-inch cooking zone when the surface control is turned on
• Helps maintain consistent pan temperature for boiling, simmering, and frying
• Common symptoms: burner won't heat, heats unevenly or intermittently, visible blistering/breaks in the coil, or scorch marks at the terminals
• Replacing a damaged element can prevent further damage to the receptacle/terminal block

• Disconnect power at the breaker and allow the unit to cool completely
• Handle the element by the bracket; avoid bending the coil
• For plug-in setups, pull the old element straight out and firmly seat the new one; for wired connections, move wires one at a time to the matching terminals and secure properly
• Inspect the receptacle/terminal block and wiring; replace if burnt or loose before restoring power

This 6-inch surface coil element restores reliable heat to one burner on your electric range. Replace a burned-out or damaged coil to bring back consistent, even heating for everyday cooking.

• Provides cooking heat for a 6-inch burner position on electric ranges/cooktops
• Helps resolve a burner that won't heat or heats intermittently
• Addresses uneven heating or visible hot spots on the coil
• Replaces elements with visible breaks, blistering, or burned terminals

• Disconnect power at the breaker and allow the cooktop to cool completely before servicing
• For plug-in coil models: lift the element, pull straight out of the receptacle, and remove from the support/drip pan
• Align the new element's terminals with the receptacle, push firmly until fully seated, and set into the support
• Inspect the receptacle and wiring for heat damage and replace any compromised components before use

This 30 in. bake element is the oven's lower heating element that produces the heat needed for baking and roasting. Replace a damaged element to restore proper oven heating and even bake results. What it does:

• Heats the oven cavity from the bottom to provide baking and roasting temperatures
• Promotes even browning and consistent cooking when functioning correctly
• Common symptom: oven does not reach set temperature or won't heat at all
• Common symptom: uneven baking, cold spots, or visible breaks/burn marks on the element

• One 30 in. bake element

• Disconnect power to the appliance before starting any work
• Allow the oven to cool completely and wear gloves to protect hands from sharp edges
• Inspect and reconnect wiring securely; replace if wiring or terminals are damaged
• Follow the appliance manufacturer's instructions for removing oven racks, access panels, and securing the element