Frigidaire Dishwasher FDBL960BS0 Not cleaning dishes properly

Upper dishwasher washarm delivery tube gasket.

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

This is a circulation pump motor for dishwashers. It controls the main pump of the appliance.The pump is directly responsible for removing extra water from the dishwasher after use. When a dishwasher's circulation pump motor goes bad, the main indicator is usually leaking from the appliance. There will be a noticeable amount of water emerging from the bottom of the machine whenever the cycle is engaged. Unplug the dishwasher from its main power source and water hookup. Remove the dishwasher from its space in the counter. Remove all necessary entry plates to access the interior of the dishwasher. There is a metal bracket holding the current motor in. Unscrew the two screws that secure the bracket and remove this component. Remember which way the motor is oriented before removing it. Unplug the power cable connecting the motor to the dishwasher. Put the two new sealing rings on the new pump motor. Repeat these instructions in reverse to install the new part.This Frigidaire dishwasher circulation pump motor is a genuine OEM replacement part sourced directly from Frigidaire. The pump motor is sold individually. This part is compatible with Frigidaire, Kenmore, Westinghouse, and Gibson appliances.

The Dispenser Assembly is an OEM replacement part specific to Frigidaire dishwashers. It is located inside the dishwasher door and is responsible for dispensing the appropriate amounts of detergent and rinse aid during cycles. Due to manufacture changes part received may appear different than what is shown in the photo.

Symptoms of a bad dispenser assembly include:

• Improper dispensing of detergent or rinse aid
• Residual chemical deposits inside the dishwasher
• Inconsistent or insufficient cleaning and rinsing results
• Leaks or drips originating from the dispenser area

Causes of a bad assembly can be worn over time, mineral buildup interfering with components, or damaged dispenser doors that impair chemical release.

This OEM Frigidaire replacement part restores complete dispensing abilities for cleaning cycles. It is also compatible with Electrolux, Westinghouse, and Kenmore models.

The Heating Element is an OEM part for Frigidaire dishwashers. This element is responsible for heating the water during the wash cycle and ensuring the dishes are properly cleaned and sanitized. Additionally, it helps to dry the dishes by heating the air inside the dishwasher during the drying cycle.

Causes of a bad heating element can include regular wear and tear, mineral buildup from hard water, electrical failures, or damage from improper loading of dishes. A faulty heating element can lead to inadequate water temperature and poor drying performance.

Symptoms of a bad heating element include:

• Dishes not drying properly
• Water not heating up during the wash cycle
• The dishwasher not completing cycles
• Error codes related to heating issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The High Limit Thermostat is an OEM replacement part for Frigidaire dishwashers. It is a temperature control device located in the dishwasher's heating assembly that monitors water temperature levels during cycles. 

The high-limit thermostat plays a crucial safety role by automatically shutting off the dishwasher's heating element if water temperatures get too hot, preventing potential burns or damage. It ensures the dishwasher maintains the proper temperatures required for effective cleaning.

Symptoms of a bad high-limit thermostat include: 

• Incomplete or ineffective cleaning even on short cycles  
• Lack of hot water or intermittent hot water during cycles
• Strange smells or visible steam emitting from the dishwasher
• The heating element fails to activate when needed

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwasher models. 

Includes one sprayarm.

The Dishwasher Drain Trap is an OEM part for Frigidaire dishwashers. It plays a crucial role in preventing debris from clogging the dishwasher's drain system, ensuring efficient water flow during the wash cycle. The drain trap collects food particles and other debris, preventing them from entering the drain pump and causing blockages.

You should replace this drain trap if it becomes clogged, damaged, or worn out. Causes of a bad drain trap include the buildup of food particles, grease, and other debris over time, or physical damage from sharp objects or mishandling during maintenance.

Symptoms of a bad drain trap include:

• Water not draining properly from the dishwasher
• Foul odors coming from the dishwasher
• Visible debris in the bottom of the dishwasher
• Frequent clogging or backup issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.