Frigidaire Dishwasher GLD2440REQ2 Leaking

The Bottom Gasket is an OEM replacement part for Frigidaire dishwashers. It is a critical component that seals the gap between the bottom of the dishwasher tub and the door, preventing water leaks and ensuring efficient operation.

Causes of a bad bottom gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.  

Symptoms of a faulty Bottom Gasket include:

• Water leaks around the base of the dishwasher
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues under the dishwasher
• Visible cracks, wear, or damage to the gasket material

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Dishwasher Tub Gasket is an OEM replacement part for Frigidaire dishwashers. It seals the gap between the dishwasher tub and the door, preventing water leaks and ensuring efficient operation. This tub gasket is typically made of durable rubber or silicone material, designed to withstand the heat, moisture, and chemicals involved in the dishwashing process

Symptoms of a faulty Dishwasher Tub Gasket include:

• Water leaks around the dishwasher door or base
• Failure to maintain proper water levels during cycles
• Condensation buildup or moisture issues outside the tub area
• Visible cracks, wear, or damage to the gasket material

Causes of a bad tub gasket can include normal wear and tear over time, exposure to excessive heat or chemicals, or physical damage from mishandling or improper door closure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

The Water Inlet Valve is an OEM replacement part for Frigidaire washing machines. It is a component responsible for controlling the flow of water into the washing machine tub during the wash and rinse cycles.

Symptoms of a faulty Water Inlet Valve include:

• No water or insufficient water entering the washing machine tub
• Washing machine not filling or taking an excessive amount of time to fill
• Leaks or water dripping from the inlet valve area
• Unusual noises or vibrations during the fill cycle

Causes of a bad water inlet valve can include normal wear and tear over time, sediment buildup or blockages, electrical malfunctions, or physical damage from water pressure issues or freezing conditions.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore washing machine models.

The Dishwasher Drain Hose is an OEM part for Frigidaire dishwashers. It is crucial for safely channeling waste water from the dishwasher into the drain system, preventing backups and leaks. This flexible hose is designed to withstand the rigors of regular use, including exposure to hot water and detergents, ensuring a reliable path for effluent without risk of damage under normal operating conditions.

Symptoms of a bad Dishwasher Drain Hose include:

• Water pooling around the dishwasher,
• Signs of leakage at the connection points,
• A musty smell indicating standing water in the hose.

Causes of drain hose failure often involve cracks or punctures, which can occur with age or if the hose is improperly installed or subjected to external pressure.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Rear O-Ring is an OEM part for Frigidaire dishwashers. This small but crucial component ensures a watertight seal within the dishwasher's internal systems, preventing leaks by sealing connections between various parts, such as the pump or valve assemblies. The front O-ring is part number AP2109102

Causes of a bad rear O-ring can include regular wear and tear, drying out or cracking due to age, and damage from chemical exposure or improper installation. A compromised O-ring can lead to water leaks and reduced efficiency of the dishwasher.

Symptoms of a bad rear O-ring include:

• Water leaking from the dishwasher
• Puddles forming underneath the appliance
• Reduced washing performance due to water pressure loss
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Front O-Ring is an OEM part for Frigidaire dishwashers. This component is essential for maintaining a watertight seal in the front areas of the dishwasher's internal systems, such as around the pump or valve connections. It prevents water leaks and ensures the efficient operation of the dishwasher. The rear O-ring is part number AP2109101

Causes of a bad front O-ring can include regular wear and tear, exposure to high temperatures, and chemical degradation from detergents and rinse aids. Over time, the O-ring may dry out, crack, or become deformed, leading to leaks and decreased performance.

Symptoms of a bad front O-ring include:

• Water leaking from the front of the dishwasher
• Puddles forming under the appliance
• Reduced cleaning performance due to water pressure issues
• Noticeable wear, cracks, or deformation on the O-ring

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Upper dishwasher washarm delivery tube gasket.

The Upper Spray Arm is an OEM part for Frigidaire dishwashers. This component is crucial for the cleaning process as it rotates and sprays water onto dishes located in the upper rack, ensuring they are thoroughly washed and rinsed. The spray arm is designed to distribute water evenly, enhancing the dishwasher's efficiency and performance.

Symptoms of a failing Upper Spray Arm include:

• Dishes in the upper rack coming out dirty or not thoroughly cleaned
• The spray arm not rotating or spinning during the wash cycle
• Low water pressure or uneven water distribution from the spray arm
• Visible cracks, clogs, or damage to the spray arm

Causes of a bad spray arm can include blockages from food particles or mineral deposits, wear and tear from regular use, or physical damage from improper loading of the dishwasher.

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Drain Pump Assembly is an OEM part for Frigidaire dishwashers. It is responsible for removing wastewater from the dishwasher tub during the drain cycle, ensuring that the dishwasher operates efficiently and effectively.

Causes of a bad drain pump assembly can include clogging from food particles and debris, damage to the pump impeller, or electrical failures within the pump motor. Over time, regular use can lead to wear and tear that affects the pump's performance.

Symptoms of a bad drain pump assembly include:

• Water not draining from the dishwasher
• Standing water at the bottom of the dishwasher after a cycle
• Unusual noises during the drain cycle
• Error codes related to drainage issues

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This is a circulation pump motor for dishwashers. It controls the main pump of the appliance.The pump is directly responsible for removing extra water from the dishwasher after use. When a dishwasher's circulation pump motor goes bad, the main indicator is usually leaking from the appliance. There will be a noticeable amount of water emerging from the bottom of the machine whenever the cycle is engaged. Unplug the dishwasher from its main power source and water hookup. Remove the dishwasher from its space in the counter. Remove all necessary entry plates to access the interior of the dishwasher. There is a metal bracket holding the current motor in. Unscrew the two screws that secure the bracket and remove this component. Remember which way the motor is oriented before removing it. Unplug the power cable connecting the motor to the dishwasher. Put the two new sealing rings on the new pump motor. Repeat these instructions in reverse to install the new part.This Frigidaire dishwasher circulation pump motor is a genuine OEM replacement part sourced directly from Frigidaire. The pump motor is sold individually. This part is compatible with Frigidaire, Kenmore, Westinghouse, and Gibson appliances.

Color: light gray. Each prong goes out about 10 inches from the center.

This short connector hose links internal dishwasher plumbing to move water securely between components. Replacing a worn or cracked hose helps prevent leaks and keeps cycles running reliably. What it does:

• Routes water between two internal connection points during the wash cycle
• Helps maintain a watertight seal when properly clamped
• Common symptoms: water leaking beneath the unit, dampness around hose joints, visible cracks/hardening, or a loose fit
• Aging hoses can stiffen and drip at barbed fittings

• 1 connector hose

• Disconnect power and shut off the water supply before servicing
• Remove the toe-kick and pull the dishwasher forward as needed to access the hose
• Expect a small amount of residual water; have towels or a shallow pan ready
• Fully seat the hose on fittings, secure with appropriate clamps, then run a brief cycle and check for leaks

This sump gasket seals the connection between the dishwasher tub and the sump/pump assembly. Replacing a flattened or cracked gasket restores a watertight barrier to help stop leaks from the base and protect floors and cabinetry.

• Creates a seal between the tub and sump to contain wash water
• Helps prevent leaks during fill, wash, and drain cycles
• Replace if the gasket is cracked, brittle, deformed, or compressed
• Common symptoms: water under the dishwasher, dripping from the base, moisture around the toe-kick

• Disconnect power and shut off the water supply; pull the dishwasher out if needed for access
• Access the sump area (often by removing the lower rack, spray arm, and filters); note gasket orientation
• Clean mating surfaces; seat the gasket evenly without twists. Do not use sealants unless specified by the manufacturer
• Reassemble and run a short test cycle while inspecting for leaks