Frigidaire Range TGF355BFDB Won't start or doesn't start

The Oven Igniter is an OEM replacement part for Frigidaire ovens and ranges. This essential component is responsible for igniting the gas burners or bake and broil burners within the oven cavity, allowing for proper heating and cooking operations.

Causes of a faulty oven igniter can include normal wear and tear over time, exposure to excessive heat or debris buildup, or electrical malfunctions preventing proper ignition.

Symptoms of needing to replace the oven igniter include:

• Failure of the oven burners to ignite or light
• Delayed ignition or inconsistent burner lighting
• Visible damage or deterioration of the igniter element

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore ovens and ranges.

The Top Igniter Electrode is an OEM replacement part for Frigidaire gas ranges. This part provides the spark to ignite the surface burners.

Causes involve repetitive heat stresses and deterioration of internal wiring over extended use. Corrosion from possible gas or moisture intrusion may also degrade electrode performance.

Symptoms of a faulty top igniter electrode include:

• Burners failing to light or stay lit during cooking
• Potential gas leaks or explosions from unlit burners
• Difficult relighting requiring extended holds of ignition buttons

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

This factory replacement oven probe kit lets your range or wall oven sense temperature during probe-cook cycles. It restores reliable probe detection and accurate temperature feedback to help your control end cooking at the right time.

• Senses temperature and relays readings to the electronic control during probe-assisted cooking
• Supports probe-cook features that stop or hold when the target temperature is reached
• Common symptoms: "PROBE" error or no detection, erratic/stuck readings, or visible damage/corrosion on the probe or receptacle
• Replaces heat-damaged or worn probe components to ensure consistent contact and accurate feedback

• Disconnect power to the appliance before servicing
• Access may require removing the oven from the cabinet; route wiring along the factory path and away from hot surfaces
• Handle connectors and sensor tip carefully; do not kink the cable
• After installation, run a brief probe test per the user/service manual to confirm proper operation