Need Help?
Call or text
Will not drain is the most common symptom for General Electric HDA2000F04BB. The instructions below from DIYers like you make the repair simple and easy. Many parts also have a video showing step-by-step how to fix the "Will not drain" problem for General Electric HDA2000F04BB. So, if your HDA2000F04BB dishwasher does not drain the water at end of cycle, doesn't drain water at end of cycle, not draining, sitting water, water won't drain or won't drain the water, the following info will help you identify the problem.
Parts for General Electric HDA2000F04BB
Note: This is the complete solenoid assembly kit. For armature & linkage assembly only, use WD1X1316.
The Solenoid Assembly is an OEM part for GE dishwashers. It plays a crucial role in controlling the flow of water into the dishwasher by activating or deactivating the drain valve. This assembly is essential for ensuring that the dishwasher fills and drains at the correct times during the wash cycle, which is pivotal for the overall efficiency and effectiveness of the appliance.
Common causes for a Solenoid Assembly to fail include wear and tear over time, mineral buildup from hard water, or electrical failures that prevent the solenoid from operating as intended.
Symptoms of a bad Solenoid Assembly include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Order now and we'll ship it out Today
Over 94% of our orders are delivered in 2 days or less
This kit is used to repair a leaking pump on GE made dishwashers. For a complete pump/motor assembly get WD26X10013.
This part is discontinued by the manufacturer and is no longer available for purchase.
The Solenoid Armature and Linkage is an OEM replacement part for GE dishwashers. It is responsible for controlling the dishwasher's draining process by operating the drain valve, which regulates the flow of water out of the dishwasher during the drain cycle.
Symptoms of a bad solenoid armature and linkage include:
Causes of a bad solenoid armature and linkage can include mineral buildup or debris obstructing the valve, electrical malfunctions in the solenoid coil, or mechanical wear and tear of the linkage components.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.
The Drain Hose is an OEM part for GE dishwashers. This part carries the wastewater from the dishwasher to the household plumbing, ensuring efficient and effective drainage after each wash cycle.
Causes of a bad drain hose can include regular wear and tear, kinks or bends that restrict water flow, or damage from improper installation.
Symptoms of a bad drain hose include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
The Tub Corner Baffle is an OEM part for GE dishwashers. This rubber component is placed in the corners of the dishwasher tub to prevent water from leaking out during the wash cycle. It acts as a barrier, directing water back into the tub and ensuring efficient operation. This is the left side. For the right side, use WD8X227.
Causes of a bad part can include prolonged exposure to detergents and hot water, leading to material breakdown, or physical damage from loading and unloading dishes.
Symptoms of a bad Tub Corner Baffle include:
The Tub Corner Baffle is an OEM part for GE dishwashers. It is strategically placed at the corners of the dishwasher tub to prevent water from leaking out during operation. For the left side use WD8X228. Color: Black.
Causes of a bad tub corner baffle can include wear and tear from regular use, improper installation leading to gaps or looseness, and degradation of the material over time due to exposure to detergents and high temperatures.
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.