Failure Code |
Fault Code Description |
Solution |
|
F03

|
One or more keys permanently pressed |
1. Clean the glass surface and remove all objects placed on it. 2. If failure remains, disconnect power for 1 minute. 3. Reconnect power. 4. If failure remains, replace the touch control module.
|
|
F12

|
Electronic board and touch module communication error |
1. Disconnect power for 1 minute. 2. Reconnect power. 3. If failure remains, replace board connection cable between touch control module and electronic control. 4. If failure remains, replace the electronic control. 5. If failure remains, replace the touch control module.
|
|
F13

|
Internal CPU checksum errors |
1. Disconnect power for 1 minute. 2. Reconnect power. 3. If failure remains, replace the touch control module.
|
|
F22

|
Key sensitivity problem |
1. Disconnect power for 1 minute. 2. Reconnect power. 3. If failure remains, replace the touch control module.
|
|
F36

|
Temperature probe hardware error |
1. Disconnect power for 1 minute. 2. Reconnect power. 3. If failure remains, replace the touch control module.
|
|
OVER TEMPERATURE INDICATION: Three indicators alternatively blink in left and right side |
This is a temporary standby condition to prevent over temperatures in the cooktop. Let the cooktop cool down and the blinking indicators will stop.
|