Failure Code |
Fault Code Description |
Solution |
|
PF
|
Power failure |
PF flashes to indicate that a power failure occurred while the dryer was running. Press Start to continue the cycle, or press Pause/Cancel to clear the display.
|
|
E1
|
Temperature sensor open |
E1 flashes in the numeric display when the temperature sensing circuit is open. Replace temperature sensor if faulty.
|
|
E2
|
Temperature sensor shorted |
E2 flashes in the numeric display when the temperature sensing circuit is shorted. Replace temperature sensor if faulty.
|
|
E3
|
Blower rotation failure |
If during a cycle the blower rotational speed drops below 500 rpms, all outputs will be turned off and error code E3 will be displayed.
|
|
E4
|
Tumbler rotation failure |
If during a cycle the tumbler rotational speed drops to 0, all outputs will be turned off and error code E4 will be displayed.
|
|
E5
|
Dry rack sensor |
If during a Dry Rack cycle the signal is lost, all outputs are turned off and E5 is displayed.
|
|
E6
|
Exhaust high limit fault |
If the exhaust temperature goes above 87.7°C (190°F) all outputs will turn off and E6 will be displayed.
|